Search results

  1. N

    New steering cylinders

    Just put new steering cylinders on my 72' 4110. They don't have grease zerks on the ball joint that connects to the radius rod (joint closest to the operators stand) Should i use a needle and grease these? Or are the built to be greaseless? Or do i go all out and drill and tap for a zerk on the...
  2. N

    Oil "Full" mark

    1792 Ford 4110. Excuse my ignorance but which mark is actually full on the dipstick. I have the operators manual and the IT manual but everything says to the "full" mark. Well to me there are 3 "marks" on my dipstick. I've attached a picture of my dipstick and labeled the marks At #1 and below...
  3. N

    Ford 4110 front bolster

    You guys think its time? Has the industrial oil pan, can support the front of the tractor from there with jack stands?
  4. N

    Radiator shroud help.

    Hello all, I've been working on what I thought was a 1972 3000 diesel. turns out its a 1972 4110 diesel, that has been placed on AG tires, that's mostly aside from this post though. I was chasing down the coolant foaming in the radiator, turned out that the thermostat removed at some point in...
  5. N

    73' ford 3000 diesel thermostat

    This new to me tractor seems to not have a thermostat in it. As soon as it's started I can see coolant being thrown into the radiator and it's causing the coolant to foam. Was going to get one on hand before I opened the system to verity its non existence and put one in at the same time. Seems...
  6. N

    Ford 3000 steering cylinders

    73 Ford 3000 factory power steering. Trouble shooting my harder to turn left problem. I've completely rebuild steering gear box and steering valve because of a leaking upper shaft seal, this included all new bearings, seals, and even a new power steering shaft. I truly believe that I followed...
  7. N

    Lets talk about front axle/steering stuff

    New to me 1973 3000 diesel with PS. I have rebuild the steering sector gear box and the power steering valve. Steers real nice to the right but kind heavy to the left even with front end off the ground. I got to looking at the left side steering components and have noted a few things that need...
  8. N

    Ford 3000 Power Steering rebuild snag

    Hello all, Picked a 1973 Ford 3000 diesel with power steering a few weeks back with the knowledge I've learn from snooping around on here, so thanks. Power steering was of course INOP when I bought it, fluid poring from the top of the column. Well I've hit my first snag. While disassembling the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top