(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. 7

    Who to rent/buy grain bin jacks from in Nebraska?

    Need to disassemble a grain bin (5 rings high & 18' across) in Kearney, NE area....anybody have a source for Jack Rental, or where I could buy used ones? Thanks!
  2. 7

    Home security systems help

    Neighbors have recently experienced some thieving issues lately & I would like to install something to be able to catch any culprits in the act. I have a 1/4 mile driveway & would like something to catch activity coming down my driveway along with something at the house to catch pictures or...
  3. 7

    New Holland skid loader hydraulic probems?

    I just recently purchased an older LX665 skid loader. It runs great, but I noticed today when I was cleaning corrals that something is going on with the hydraulics. There is no problem lifting, however every once in a while (but NOT all the times) when I tilt the bucket up, it will slowly drop...
  4. 7

    payloader vs. tractor

    I currently have a IH 706 (approx 75 hp) that I use for unloading & stacking hay, clearing the driveway of snow & busting through drifts, pulling a ground driven manure spreader & cleaning corrals. I like the smaller size tractor & it "generally" works for everything I need it for, but there...
  5. 7

    Skid loader.....Case or Bobcat

    I already have a tractor & I would like to get a skid loader since they have their purpose. I would use the skid loader to feed a couple of rounds a week, snow removal & corral cleaning. I don"t want to spend over $10k & have done a little research & think my best options are a Case 1845C or a...
  6. 7

    Stripped threads on carb

    I have been long overdue for a carb rebuild & a new kit installed. As I was taking off the carb from the manifold today, I noticed one of the threads are stripped on the carb. Is there anything I can do to make sure I get a good seat when I re-install my carb/gasket back on to the manifold...
  7. 7

    L or H manure spreader???

    I am stuck between two spreaders I am looking at & need your help. I know both of these spreaders are very similar in size, but I was wondering if one was a little "better" than the other as far durability, parts availability, etc??? Any help is greatly appreciated to help make my decision!
  8. 7

    JD manure spreader ...... H or L???

    I am stuck between two spreaders I am looking at & need your help. I know both of these spreaders are very similar in size, but I was wondering if one was a little "better" than the other as far durability, parts availability, etc??? Any help is greatly appreciated to help make my decision!
  9. 7

    manure spreader parts??

    Anybody have any good resources for replacement parts for an old JD (HH model) manure spreader??? I have been unsuccessful with internet searches.
  10. 7

    JD Model HH manure spreader

    I found a manure spreader that I am interested in purchasing, however, I was told that it needed a little repair to the gear that drives the chain was broke & needed repaired. he said that the case that was around the gear part broke off & that it held a spring that kept the tension on it to...
  11. 7

    IH 784 lost lights after battery drain?

    The other day after I was done dropping a round bale to the cows, after I pulled the kill switch I FORGOT to turnoff the ignition. Surprisingly, this was the very first time I have done this. The battery was completely drained this morning, so I had to jump start the tractor with my truck...
  12. 7

    A quitting

    I went out to mow the lawn with my A that has a woods belly mower. After a couple of minutes, it quit. There was no spitting or sputtering, it just quit on me as if I hit the kill switch. Went to start it again & the battery was dead, so I gave it a jump. Once I got it started up again, I...
  13. 7

    IH 784 quit

    I was out plowing snow this morning with my IH 784 & it started slowly lacking power & continued to run for another couple minutes. As I was backing it into the barn it sputtered a couple of times & then died on me. Tried to start it back up & it will turn, but won"t start. Any idea"s what...
  14. 7

    snow plow blade

    I just picked up an 8" blade & I want to be able to mount it on my quick-attach loader on my tractor. I know that I can purchase steel plates to weld on it, but I would like to somehow make it angle. Any ideas out there on how to manufacture a way for it to angle??? Pics are very much...
  15. 7

    attn: Bob and/or Janicholson

    This is in regards to the A that won't crank/start & is completely dead. I played around with it a little tonight & tried your suggestion (using test light between battery cable terminal on the starter switch & ground). The came on & when I pressed the starter rod, there was a little pop at the...
  16. 7

    A won't start

    Went to do some mowing with the A yesterday & when I went to start it, it cranked over, but my hand slipped of the starter lever. So I went to push the lever in again to start it & NOTHING. It didn't try to turn over or anything. Thinking that it might be my starter or starter switch, I took...
  17. 7

    setting pole barn posts

    I am putting up a pole barn & have done a little research on setting the posts/columns, but am still not sure how I want to set them or what is the best way to set them. My soil is kind of sandy & I live in WY. What is the best way to set these posts so they last for a long time??
  18. 7

    Farmall A starter

    Went to start my A to do a little mowing & the there was NOTHING when I pushed the starter. Took the starter off & it appeared that the bendix (? not quite sure of the exact name) wasn't recoiling back. So I spun it back & mounted the starter again. It started right up. Started it a couple...
  19. 7

    IH 2250 loader cylinder leak

    I have been putting off repairing some leaks in both lift cylinders. They weren't major leaks, but finally had enough & want to fix them. Do I have to do a complete rebuild, or would just replacing the seals be enough? There are no pits in the rods. I was also considering repairing the two...
  20. 7

    L59A Woods belly mower

    I recently replaced the blades on the belly mower for the first time since I got the tractor/mower. I figured it couldn't bee too hard for a "first timer", so I installed all the blades the same way (with the cut going counter clock-wise. Noticed the center blade wasn't cutting like it should...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top