(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. K

    Small Diesel Tractor Fuel System

    I have a Ford 1120. Its been sitting for 6+ years. The PO said it run, but was told something in the fuel system needed cleaning. The tank is empty and rusty. I can get clean fuel to the injector pump. Should I then try to start it, or do anything to the injector lines and injectors? Any...
  2. K

    Older Snapper Zero turn

    I bought this mower and one Hydro is slightly slower than the other. There is a big (drain?) bolt on the bottom, is that the drain and can I replace the fluid?
  3. K

    Kawasaki No Spark

    I have a john deere with a Kawasaki 17hp. It has no spark, can I unhook the wires going into the engine like on a briggs and check for spark. I tried this and no spark. Or could this be a safety kill causing this? Thanks for any help. kevin
  4. K

    Cub Cadet V/R

    I have a Cub 127. When I got it, It wasn't wired completely and not running. I hooked it up enough to get it going. The Voltage Regulator was wired except for a ground, when I connected it, the V/R smoked and it shut off. It had 4 contacts. It runs good now just no charging system. I have...
  5. K

    Cane Syrup

    Family Thing been going on since 1988 here. People drive and fly in. The pipe is how the sugar cane juice is pumped to the kettle.
  6. K

    Model 1 Tiller

    I got this tiller a year ago. It turns smooth. I don't know any thing about them, if its lubed at all, or if it takes oil or grease? Should I open it up and inspect? I read on here a lot and appreciate all help. Wish I could help out more but I aint that smrt yet.
  7. K

    Massey 35 Steering

    I purchased the steering shaft bearing and cup assembly from this site. Now how do I get the old cups out? The upper I've got started and can probably get it, but the lower I'm not sure about. I have most tools to include a press but no acetylene torch. I can get access to one if needed. It is...
  8. K

    MF35 Steering Bearings and Cups

    I purchased the steering shaft bearing and cup assembly from this site. Now how do I get the old cups out? The upper I've got started and can probably get it, but the lower I'm not sure about. I have most tools to include a press but no acetylene torch. I can get access to one if needed. It...
  9. K

    Walking Tractor?

    My Grandma called it a Mule. I got it from my uncle. I just like old stuff. It was in a barn an said to run when parked. Turns over and has compression. Says (Burns?) on cross bar Anybody know anything about 'em? Is it a briggs engine? Year?
  10. K

    OT Weird Clouds

    These were taken in Beaufort SC in Dec 2012. There were several of these around you can see some others in the background. Any one know what its called?
  11. K

    Briggs 19 HP OHV

    I have a engine that the rpms bounce. I have cleaned the carb and it still does it. It doesnt have needle adjustments. If I hold the govener or when I engage the blades it will run smooth. Do ineed to adjust the govener or valve.
  12. K

    starter/generator

    Do I just ground the body and touch the + to one or both of the terminals?
  13. K

    OT Speed Demon Video

    http://www.youtube.com/watch?v=Wt_ZL6rWHLA Talent, Style, Huevos, And Youth. Look what it can be.
  14. K

    Garden Tractor w/ random Pic

    Looking at a GT18 craftsman on columbia CL. Has a Perkins engine, 16hp, It needs a starter and a steering wheel. Its about 2 hours awawy. He says the motor is free, deck is realy good and it has a rear 3pt. w/ scrape blade. $250 He will meet me half way. How costly is a starter &amp...
  15. K

    Craftsman Hydro Pics

    Ive knocked off alot already. Gotta clean it up. Ill try to find a name/number.
  16. K

    Craftsman Hydrostatic

    It is model 917.251522. Ive always heard not to change the oil in hydrostatics but this one has a filter. It works fine, but should I change it and what type of oil should I put back in? What filter should I put on it? Or just leave it alone?
  17. K

    Garden Tractor/Kohler Ticking (Pics)

    I first want to thank eveyone for all the knowledge I get from here, I read alot and when I can, I help others. I have a Kohler 20.5hp I bought, it ran good for awhile, then suddenly started ticking on the right side. It has hydrolic lifters. The intake rocker is very loose. Can I adjust the...
  18. K

    OT Ethanol

    I have many, many small engines. I have had my share of carburetor problems, although, it seems the quality motors are immune to some or most of these problems. I have a Honda side by side that always starts and a Husqvarna chain saw that sits and sits but always starts the same as if it were...
  19. K

    Fencing Knoledge Applied (Pics)

    Thanks to all that helped. Its to keep to Labs in.
  20. K

    Fencing Knoledge?

    Im helping my brother in law fence his back yard. I fenced about an acre of mine 5 years ago. Hes using bigger post and 2x4 welded wire, I used hog wire. We are using horizontial bracing on the corners. Two questions. How should we attach the bracing to 5 1/2 post? A lag bolt through thew...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top