(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. M

    36 hart parr Oliver 70

    I have a 36 Oliver hart parr 70 that I am wanting to put dual exhaust on. Does anyone know where I can find the manifold elbows to do that or any salvage yards that specialize in Oliver tractors that I can reach out to. Thanks in advance
  2. M

    Diff gears

    Looking for a set of gears For a farmall os4. If anyone knows a salvage yard that might have some let me know. Thanks in advance
  3. M

    Farmall h motorbuild

    I posted this in the external_link also but wanted to get as much advice as possible I have a 51 farmall H that i have got to do a motor rebuild on and was thinking about buiding it so i can pull farm stock with it and be somewhat competitive. Was thinking about changing to a 300 or 350 head, lp...
  4. M

    farmall H motor build

    i have a 51 farmall H that i have got to do a motor rebuild on and was thinking about buiding it so i can pull farm stock with it and be somewhat competitive. Was thinking about changing to a 300 or 350 head, lp manifold and a carb from a 300 or 350 also what size pistons should i go to to...
  5. M

    Introducing John Deere A

    Picked this 1949 A with power block up for a restoration project thought I would share some pics of it before during and after my project was completed.
  6. M

    Introducing John Deere A

    Picked this 1949 A with power block up for a restoration project thought I would share some pics of it before during and after my project was completed.
  7. M

    49 John Deere A manifold question

    The 49 A I am restoring has a powerblock and the manifold will have to be replaced due to a hole burned in it. I have read about the cold weather manifolds would they give me even more hp amd what are the differences in them and a normal manifold. Thanks for any info
  8. M

    What I do when it rains 10 inches in five days

    Here in North Alabama we have had 10 inches of rain since Tuesday morning since I have a lawn maintenance and landscaping business I haven’t been able to work so finished up one project and started on another one. I was repainting a Massey Ferguson 135 for someone else got it all put back...
  9. M

    What I do when it rains 10 inches in five days

    Here in North Alabama we have had 10 inches of rain since Tuesday morning since I have a lawn maintenance and landscaping business I haven’t been able to work so finished up one project and started on another one. I was repainting a Massey Ferguson 135 for someone else got it all put back...
  10. M

    135 massey fuel pump question

    Replaced the fuel filter on my 135 today and have done this plenty of times but I can’t get fuel to the injectors. I primed the filter and got fuel to the pump loosened up the bleed screws and have good flow to that point. Loosens the injector fittings turned the motor over for prob 30-45 min...
  11. M

    Cast iron front pedestal repair

    I have a cracked pedestal on my A John Deere I am about to start restoring. Wanted to get opinions on repairing it compared to what I have thought and researched. My plan was to cut/grind a V or U groove at least 1/4-3/8” deep and mig weld with nickel wire making short welds with low current and...
  12. M

    1936 Oliver hart part rowcrop

    i have an opportunity to buy an Oliver hart parr 70 row crop 1936 model older restoration with a restored hart parr turning plow. Ran across this tractor and got interested in it because I have never seen another one. Are these rare? CAnt find much info on them.
  13. M

    John Deere A wheel hub removal

    So here’s what I have 1949 jd A with the rear rim coller/yoke/wedge (not sure what the correct term is) on the inside of the rim. I am trying to remove it so I can make the rear tires narrower. Have soaked them in penetrating fluid, removed the bolts and put them in the two adjacent holes used...
  14. M

    49 John Deere A starter question

    Tractor has been cranking fine no issues at all. Then all of a sudden started dragging some when turning over then nothing at all when stepping on the starter pedal. First thought was battery is weak(even though bought this spring). Removed the battery clamps cleaned them and the terminals also...
  15. M

    Farmall h slow to turn over

    My farmall h is hard to crank even with a fully charged battery it will barely turn over. Here’s what I have and have done: had battery checked tested good, 6 volt system with #1 gauge battery cables, completely rebuilt starter, new switch. I have cleaned the starter base that mounts against...
  16. M

    Restoration opinion

    I have restored two tractors a 1948 C Allis Chalmers and a 1952 Farmall H. Both had set for over 20 yrs and neither ran when I got them. Looking for a new project a John Deere A is my preference. My question is what’s everyone’s opinion pay more for a running driving tractor and restore or a...
  17. M

    Lights not working question

    Just finished the restoration on my H farmall. Wired everything up (was a barn find and goats had eaten all the wiring) according to a schematic I found. Using a light tester I have power through the light switch all the way to the lights but still not working. Also I have power on both sides...
  18. M

    Farmall rims

    I posted this in the farmall section also but I am restoring an h and the front rims were not in good condition. I found some at a salvage yard I. Good shape but my question is do the clamp style rims need something welded to the rim on each side of the clamps?
  19. M

    Farmall h front rims

    Do the clamp style rims need a block welded on sides of each clamp.
  20. M

    Farmall H magneto timing question

    Not sure if I have the timing set properly. I removed #1 plug rolled the motor over until I felt compression, placed a drinking straw into the plug hole to get tdc. timing marks on crank pulley lined up correctly. If facing the front of the tractor I set it at the first mark ( mark on right) set...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top