(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. Hdonly

    FEL Thumb

    Welded on a thumb on the FEL bucket on my Jubilee. Should make life a lot easier for this old man. I have a bunch of trees and bushes to get rid of on my property.
    • Hdonly
    • Thread
    • Replies: 2
    • Forum: Ford
  2. Hdonly

    DR Pro 475P PTO driven chipper

    Does anyone have any personal experience with this machine? Always heard about DR equipment, but never owned any. Plan on running one behind my Ford 651. I have about a million small 1" - 2" trees to cut and get rid of.
  3. Hdonly

    Ford 19-105 FEL bucket cylinder rebuild

    How the heck do you get the endcaps off? Are they standard RH pipe thread? Do you normally need a torch? I hate to use a torch around hydraulic oil.
  4. Hdonly

    Working on my Ford 19-105 Front End Loader.

    Bad diagnosis on my part. I replaced the control valve assemble. Now I can tell that my problem is the bucket cylinders are leaking internally so the bucket won't stay in the load position. Immediately starts dumping as soon as I let go of the spool handle. Anyone know right off hand where to...
    • Hdonly
    • Thread
    • Replies: 12
    • Forum: Ford
  5. Hdonly

    Add hydraulic filter to 19-105 FEL

    I know these loaders came without hydraulic filters. Would it pay to add a filter or not? It has been working since the 1950's I guess, so it is probably a waste of time. What say you?
    • Hdonly
    • Thread
    • Replies: 20
    • Forum: Ford
  6. Hdonly

    BF Avery V front axle cradle broke

    The cast cradle that bolts the frame rails together and pivots the front axle got broken. Does anyone know off hand if this part is cast iron or cast steel. Trying to decide if to weld it or fabricate a new assembly from mild steel. I feel like it will never hold up after welding with nickle...
  7. Hdonly

    Ford Jubilee with 192 engine.

    My Ford Jubilee with a 192 engine in it just had the starter lock up the engine. I felt like the starter was going bad by the noises it was beginning to make. I rebuilt the starter once several years ago when the same thing happened. I just found a pre-engaged starter that I am going to try...
    • Hdonly
    • Thread
    • Replies: 26
    • Forum: Ford
  8. Hdonly

    192? engine from Jacobsen G10

    My friend gave me an engine from a Jacobsen G10 tractor mower. I am thinking it is a 192 but not sure. The label on the valve cover was unreadable. It is now in my Jubilee. It bolted right on with no problem. Just curious if the block casting number tells anything. D2NL 80150 is the number.
    • Hdonly
    • Thread
    • Replies: 5
    • Forum: Ford
  9. Hdonly

    BF Avery 4-bolt front wheel lug spacing

    Anyone know what the lug spacing is on a BF Avery Model V front wheel? Need to carry a wheel with me and need it before I can go measure it. Thanks
  10. Hdonly

    Ferguson TO-20 dies after 15-20 minutes running

    My TO-20 starts and runs great. After about 15-20 minutes it will start losing power and then die. After it cools down for about a half hour, it will start up and run again, then repeat. Thought it might be fuel, but the sediment bowl stays full and no trash in it. I'm thinking a bad coil or...
  11. Hdonly

    Toro 223D with Mitsubishi L3E engine

    I have a Toro 223D Groundsmaster mower with a three cylinder Mitsubishi L3E engine. I have had it for a few years. It has gotten harder and harder to start over the years. Long cranking time now with excessive black smoke the longer it cranks. If it does start (rarely nowadays) the smoke will...
  12. Hdonly

    TO-20 water pump

    Put the cheaper water pump on my TO-20 back in December. It got a little too warm on me yesterday. Got off the tractor and saw the water pump leaking at the weep hole already. Only 3 months old. Guess I should have bought the OEM rebuilt more expensive pump in the first place. Darn it!
  13. Hdonly

    Having a little fun on a slow day

  14. Hdonly

    Columbian Vice Cleveland Ohio

    I first started using this vice in 1983 when I started working for a small city here in the Florida Panhandle. Part of the jawholder on once side got broken off. I welded the jaw back in to use until we got a new vice. The boss at the time told me to throw it in the junk pile. I threw it in the...
  15. Hdonly

    International Harvester F-2275

    A friend of mine was doing some work for me on my property. He hauled his JD 490E excavator up here with this truck and trailer. That was in 2008. He has since had some serious health problems (blood clots, leg amputation and a stroke). He is now in recovery for the stroke and will never work or...
  16. Hdonly

    TO-30 rubber seal for oil pump pick up tube

    Looking for the rubber seal on the oil pump pick-up tube. Mine is very hard and falling apart. Hate to put the oil pump in with this wore out seal. Anyone know where to find one? Looks like 0.5 ID x 0.75 OD x 0.25 thick. Looks like what they call a quad seal.
  17. Hdonly

    Anvil

    Making my son-in-law an anvil for his knife making hobby. Started with a piece of old RR iron. So far this is a couple of days work. Still have to drill mounting holes, mill a good flat surface on the back potion and do a lot more polishing. My first anvil project and maybe my last- haha
  18. Hdonly

    Nobody Knows!

    https://www.youtube.com/clip/UgkxjT5vwPJgScGH-2GEBQW6wZt2b0Y_cVzG
  19. Hdonly

    Temperature gauge on my TO-20

    Got a temp gauge on my TO-20. Took it out and raked my sand driveway after the rains we had. Tractor runs on the cool side after installing new water pump, hoses and new thermostat. No thermostat in it when I bought it. I feel it stays cooler now with a thermostat.
  20. Hdonly

    Daewoo Mini Excavator

    Anyone recognize what model this is? Going to look at it soon. Owner has had a stroke and his brother doesn't know what it is.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top