(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. M

    White 4-270 Tractor

    Im looking for a wear block on the 3 point of a 4-270. Does anyone know where a salvage tractor is hiding or know someone with some parts? The dismantled ones at Maibach and Gratton Coulee are barebacks so no success there. Thank You
  2. M

    G-1000 Diesel turbo set up

    I'm looking for a turbo set up for my G-1000. If anyone has one or could steer me in the right direction I would appreciate it.
  3. M

    White 9720 engine calling it quits

    I have a 9720 White combine and the engine must have burned a hole in a piston or had a piston fail. Does anyone know where I can find a temporary replacement until I can overhaul the one I have? I run a 9700 and 9720 and I love them both they are awesome machines. Where I run two machines it...
  4. M

    403 crank machining

    Im putting a 403 crank in my 5 Star and im looking for someone who can machine the back of the crank for the pilot bearing hub. Thanks in advance.
  5. M

    White 4-270

    Over the weekend I tried replacing the yoke seal on the bottom driveshaft coming from the powershift on our 270. I pulled the driveshaft off, removed the bolt holding it onto the splined shaft, and tried pulling the yoke off. The yoke wont budge at all. I even tried using a puller and put quite...
  6. M

    GTBD power upgrade

    I have a 54 GTBD that i would like to make some more power out of. I have the pump turned as high as it will go from the instructions I have read on this site. Under full load it hardly smokes. The pump was rebuilt but just isnt giving enough fuel in my opinion. I saw one on here that pulls 8...
  7. M

    5-Star T/A

    I was looking for some literature or overhaul manual to fix the T/A in my 5-star. Any help would be appreciated. I live in northcentral Nebraska.
  8. M

    5 star T/A

    I am rebuilding a 5-star for pulling. I posted about earlier but I have been so busy I didnt get a chance to get anything done. Does anyone have a T/A assemby ready to go and I can send you the core? I want to try and take it out on her maiden voyage next spring and figured if someone had one...
  9. M

    5-star T/A

    I am rebuilding a 5-star for pulling. I posted about earlier but I have been so busy I didnt get a chance to get anything done. Does anyone have a T/A assemby ready to go and I can send you the core? I want to try and take it out on her maiden voyage next spring and figured if someone had one...
  10. M

    5 Star T/A

    I am looking for a reman T/A or someone that rebuilds one. Or does AGCO make parts anymore for these to rebuild one yourself? Thanks
  11. M

    Aluminum Oil Pan-5star

    Im looking for someone who makes such a thing if they do. I"m making my 5-star a puller and want to lighten it up a bit. Thanks in advance
  12. M

    5 star paint

    I'm getting ready to paint my 5 star. I would like your input on some paint. Who is making some of the best Moline yellow these days? And what are the paint codes? I've bought some paint in the past and wasn't very proud of it. Thanks in advance
  13. M

    LAE power unit

    I have an LAE power unit I would like to see go to a good home. Serial# 5320759LAE. The engine is free. I had the magnedo charged last year thinking i was going to get it running but never got around to it. I took the carb off and disassembled it but never got it put back together either. I wish...
  14. M

    GBD pump

    I need to find a place that knows something about and can work on my Bosch pump in my GBD. I am located in Nebraska. And everyone I've called so far knows nothing about them. I put 504 blocks on it and was hoping to get it turned up while I had it worked on. Thanks in advance. Hope everyone had...
  15. M

    GBD pump

    I need to find a place that knows something about and can work on my Bosch pump in my GBD. I am located in Nebraska. And everyone I've called so far knows nothing about them. I put 504 blocks on it and was hoping to get it turned up while I had it worked on. Thanks in advance. Hope everyone had...
  16. M

    GBD

    I just recently got my GBD running after sittingg for quite sometime. When I overhauled it I put 504 blocks on it, did the valves, and injectors. Also the energy cells. It is very hard to start and smokes quite a bit. Also has significant power loss. I don"t know if its the injector pump or not...
  17. M

    GBD

    Im just about done putting my G engine back together after an overhaul. It had the 425 blocks on it and i swaped them out with 504 blocks. It has the bosch pump on it and i was wondering if you could turn the fuel up on it a bit? Or if you guys have any other power tips for me. I will only be...
  18. M

    M-M Z

    I have my 45 M-M ZTU apart doing an overhaul. I have heard that you can get a few more ponies if you advance the cam. How do you go about doing this? Does the cam just run one tooth in front of the crank or behind one tooth. And if you do this do you have to change your mag timing? Thanks in...
  19. M

    White 4-270

    We are having an overheating problem with one of our 4-270"s. It has good fuel and boost pressure. We had the radiador redone put a new thermostat and water pump on it and are still having problems with it. We have two of these ol girls and still use them quite a bit. We have never had such a...
  20. M

    M5 Diesel

    I just recently overhauled my M5 Diesel. It had no more than 4 hrs on the overhaul and the motor locked up. Put new pistons main and rod bearings in it. I took the main caps off and the main bearings have some scars in them also took the rods loose and those bearing dont look to bad. But the...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top