(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. E

    Ford 3600 pto wont stay engaged

    I have a Ford 3600 that the pto jumps out gear when I'm brush hogging. Where is the best place to start? I read it might be a snap ring. If you grab the pto shaft it has some play in and out.
  2. E

    3600 3 pt trouble

    I recently got a 3600 that had been sitting in a barn for about 10 years, when I got it started the 3pt arms raised all the way up and it sounds like the hydraulics are under load. I got a service manual and everything in the troubleshooting talks about if the lift won't raise but there isn't...
  3. E

    Ford 3600 3 pt

    I just got a 3600 that had been sitting in a barn for about 10 years. I changed fluids and filters and got it started. When I started it the first time the lift arms came all the way up and the hydraulics sound like they are under a load and the arms won't go back down no matter where the...
  4. E

    Hesston 1070 manual

    I bought a Hesston 1070 haybine today and I was wondering where I could find a manual. Also what are the good and bad with this machine?
  5. E

    Which haybine?

    I'm looking at two haybines, a Hesston 1110 and a New Holland 474, what are the pros and cons of each machine?
  6. E

    54 DC clutch

    I have a 54 DC and the clutch won"t full disengage, when I first got the tractor running the clutch was stuck. I got it freed up and have been using it for light jobs like mowing, raking and pulling a square baler. I have it fully adjusted on the linkage and it still won"t disengage when the...
  7. E

    300 Roundnose

    Looks like an industrial or maybe just painted yellow. I thought about going after it but don't really need another project right now. Case 300
  8. E

    Cub-22 mower on an A?

    I have what I think is a cub 22 mower, I was wondering if it is possible to mount this on an A.
  9. E

    OT 6.0 powerstroke problems

    My 05 Ford diesel had a failing egr cooler that I put off too long too long and it finally quit. I started the truck and drove about a half mile, shut it off, came back a couple hours later to head home and clunk, wouldn't crank, I was parked on an incline and the cooler leaked coolant into the...
  10. E

    276 knotter one more time

    This baler is about to drive me crazy, the left hand knotter ties perfect every time but the right side makes a knot with very short tails and as soon as the twine gets tight the knot comes undone. I've adjusted the knife arm travel to be 1/2" past bill hook on both sides, I cleaned out the hay...
  11. E

    Knotter problem update

    I have gone over the baler manual and the knotter service manual and made every adjustment per the book so I think anyway. Now the problem is the right side knotter is missing every single knot, no loop on either end of the twine. The ends are kinda ragged looking, just put new twine knives on...
  12. E

    276 knotter problems

    My 276 baler misses knots on the right side, the top twine will have a loop on it but the needle twine will not, it will bale 5-10 bales and then 2-3 open then start baling again. I have checked twine disc timing and just replaced knives and adjusted knife arms. I'm guessing its something to do...
  13. E

    820 steering wobble

    I have a 1970 820 that has a steering wobble at high speed but only on hard surface. The ball joints in the front have some wear but the drag link and the drop arm move back and forth quite a bit. I popped the cover plant and checked the drop arm bolt that holds the arm on the tapered shaft and...
  14. E

    JD 346 random bale length

    I borrowed my brother in laws 346 baler to get some hay up yesterday since I was still waiting on parts for my baler. I ended up with a field of bales anywhere from just over 2 ft to 4ft long, I checked the trip wheel to make sure it wasn't slipping or adjustment wasn't changing. One bale out...
  15. E

    New Holland knotter removal

    I have the operators manual and knotter service manual but it's not really clear how to completely remove the knotter stack to replace a knotter frame, can anyone give me any tips?
  16. E

    New Holland 276 needle yoke

    I bought a 276 baler about a month ago and I've been getting it ready to bale, checked the timing, adjusted the knotters, new twine, changed one broken needle and went to the field ready to bale hay. Somewhere between the second and third bale through it sheared the pin in the knotter drive...
  17. E

    Manual downloads

    Has anyone ever downloaded any manuals from dmcretail.com? It shows to have manuals for all CNH divisions, I purchased some manuals for my square baler but when I go to download them my computer says they have been blocked for my safety, is this some kind of scam or something wrong with my computer?
  18. E

    Dearborn 14-40 rake

    I have an old Dearborn 14-40 hay rake, with the rake hooked to my tractor and the reel height adjusted all the way up the teeth are digging into the ground about a half inch. Someone has put what look like John deere baler teeth on it and I'm wondering if they are too long. It has round bars so...
  19. E

    TA-7 hitch

    Does anyone have dimensions for a hitch to fit eagle hitch DC? I have the operators manual and the hitch connections manual so I have a basic idea of what I need to make but if anyone could provide pictures and measurements it would be helpful.
  20. E

    More old farm pics

    I found a few more old pictures of my grandparents farm, most of them have Case in them somewhere.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top