(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. D

    1070 power shift update

    eMl I tried adjusting the c2 retard screw but there was no change so I pulled the c4 spool out which was sticky & cleaned & lubed it w/new oil. Some one had cut out a notch next to the floor cover to remove the bolt which holds the shift linkage down to get a socket on that bolt. By removing...
  2. D

    1070 power shift update

    eMl I adjusted the c3 retard adjuster slightly but there was no change when pushing the clutch in when cold. Tried more than one position w/adjuster screw but there was no change. Put the adjusting screw back where it was originally. Tractor still stopped fairly quickly when pushing the clutch...
  3. D

    1070 power shift update

    eMl This is for eMl. I lucked out when buying a socket to get the c3 cap off. There were 3 choices & I bought a deep well w/a thin wall that fit on the cap w/no mods. to the socket. I was surprised it fit. It was the cheapest socket of the 3 which I'm sure is why it was so thin. The machine...
  4. D

    1070 power shift

    What needs to be removed to take the c3 spool out for cleaning? I've cleaned the area around the c1 & c3 spools & taken off the c1 cap in hopes of getting a wrench on the c3 cap as the two are very close together but haven't been able to get a wrench on it. Don't want to take something apart I...
  5. D

    1070 power shift

    When driving out of the shed after tractor has been sitting over night & then stopping, it stops abruptly like something is sticking. After a couple minutes it's fine. Does one of the spools need cleaning? Also, when power shifting from 3rd to 2nd in 3rd range there's a clank. Power shift...
  6. D

    1070 ac temp control

    I'm installing a new a/c temp. control on our 1070 & have everything ready for the install, cab roof off & heater core & evaporator freed up on the end the temp. control wire goes on the evaporator so I can lift the heater core out of the way & lift the evaporator just high enough to put the...
  7. D

    1070 steering hand pump

    I installed new seals in the pump but when I tighten the bottom cover the shaft is binding & won't turn even when I put the old seal back in. It's the large seal. The new seal is about 1/8" taller but both cause the binding. I have a service manual but must have missed something. Can somebody...
  8. D

    1070 steering hand pump

    This is for Agri King & others who may be able to help w/this. I posted a message a few weeks ago about the hand pump leaking on our 1070. I did tighten the bolts but it still leaks. I do have a shop manual which was used at a Case dealer that will help in removing the pump but I'm sure somebody...
  9. D

    1070 steering pump leak

    Steering pump is leaking on our 1070. We finally got into the field this spring for the first time. Tractor has a cab. The steering works fine but what could cause this leak. I know there are 2 o rings & 2 seals. Fluid seems to be coming out at one cover bolt. Any help with this...
  10. D

    686 oil pan gasket

    The oil pan gasket was leaking in the rear so I replaced it but it still leaks. I called the local dealer to ask what I might have done wrong & the service manager said there are 2 small rubber wedges, one on each side in the back where the leaks are so I ordered them. He said they should...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top