(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. T

    Selling my Farmall SC with implements. What is it worth?

    Hi, I am selling my Farmall SC with implements. I did post it in the Market Place. Any advice on selling it or how much I should ask for it would be appreciated. It has some implements that go with it; loader, back blade, 7 foot sickle mower (very nice condition), drag rake, 2 point to 3 point...
  2. T

    SC wide front pitman arm bolts question....

    Ok. My pitman arm for my wide front end two large 5/8 x 1 3/4 NF bolts that attach it to the steering shaft (worm wheel shaft??). These are NOT the original bolts. They are aftermarket grade 5 bolts that I put in there. My question is, was there originally special bolts with shanks on...
  3. T

    Thermostat on Super C.... is it working???

    Problem: my temperature guage needle needs extreme temperatures and work load to budge. Well, I asked about this in the past and had a couple responses. I will tell you what I found so far. Sorry if this topic has been covered in excess. I removed the engine cover and the front...
  4. T

    Super C wide front pivot bushing and pitman arm bolts??

    Hi, Moving onto new projects. After researching, I found I am not the only person (in times past) looking for the 3 pivot bushings for the wide front on my Super C. They are part number 353253R1, 353254R1 and 353254R. I read that the diameter of the shaft is 1.45". Does anyone know the...
  5. T

    Bushing for C/SC wide front...

    Has anyone sourced the steel backed bushings for the wide front center pivot on the C/SC? Thanks, Terr
  6. T

    SC tune-up continued. Fuel bowl and carb.

    Moving on to other areas. I ordered my ignition wires so they should be coming soon. I have had issues with the fuel bowl leaking. I think it is coming from the stem. I also have too much gas dripping from the carburetor even when fuel valve is closed. This doesn't happen routinely but I...
  7. T

    Farmall SC needs major tune up. Advice on parts please.

    Hello! Looking for some advice. Just want to do it right the first time. I have a 1953 Farmall SC. Good shape but time for some TLC. Hard starting and a few other things. I need points, condenser and plugs. This tractor is factory set-up. Any recommendations on who to buy parts from...
  8. T

    Farmall SC charging issues.

    Help me help me help me! First off, Hello again. Last time I was here, I was fixing a broke axle on my SC and replaced a bull gear. All went well with that. So, I finally got around to working on my charging system (was always in a discharge state). Only way it would ever charge is if...
  9. T

    Thermostat range for gas farmall super C

    What is the correct thermostat range for a farmall super C , gas engine? Just curious. I have a thermostat in mine but it seems to take an act of god to get the temperature gage to rise at all. Is this normall? I did find an original 165 to 195 degree thermostat. Wondering if that is too...
  10. T

    WTB: Farmall C or SC 37 1/2 axle.

    Hi, not sure if this is the right place to post this. I am looking for a good used C axle 37 1/2 approximately. Someone might have one out there. Please let me know. Thanks! :shock:
  11. T

    Super C axle question...

    I am replacing my axle. Bought a used axle. That showed up with some pitting over the outer seal surface. I had that fixed. Then I installed the axle. I was suspicious of the outer bearing surface but I didn't think I would find another issue on the same axle. Anyways, it seems that...
  12. T

    Farmall C/SC axle retainer bolts..

    Anyone know where I could find the retainer plate washer and the two bolts for the axle for my Super C. I seem to have misplaced them. Thanks
  13. T

    Super C wide front bushings replacement.....

    Anyone ever replace the bushings on the pivot shaft for the wide front on a factory set-up? I looked for new bushings and case said they are long gone. Any suggestions appreciate. Thanks in advance!
  14. T

    Farmall C/SC wide front pivot bushings....

    Hello, been forever since I been on the board. Broke an axle on my SC and have it in the garage working on it. I was wondering if anyone has any success at locating the bushing for the front pivot shaft on a wide front end for a C/SC. Mine have a fair amount of play in them and I like working...
  15. T

    Super C oil pan

    Hi, I went to replace my oil pan with a good used one and found the oil plug to be a different size? Interesting, never new they made a change in drain plug size. Tractor is 1953. Can anyone shed light on this? I would like to keep my tractor original as possible. Terry [email protected]
  16. T

    implement decals??

    Hi, I am restoring a fast hitch No. 1 back-fill blade for my Super C. Does anyone know if they sell decal sets for this blade. It had IH symbols on the back of the blade and I believe it either said International or International Harvester on the main tube of the hitch??? Any sugestions would...
  17. T

    back blade edge question......opinion needed

    I have a 2 point back blade for my super C that I am fixing up. I am going to make a new blade edge for it. Is that blade edge simply mild steel or is is something special as used on blow blades, etc? Thanks, Terry
  18. T

    Need measurement off of a fast hitch back blade...

    Hi, I have a 2 point fast hitch back blade for my farmall super c that I am restoring. I need an over all length measurement for the jack stand. Also, I have been looking at different back blades and notice there was more than one type of stand used. I could also use a description of the pad...
  19. T

    Assistance needed with sickle bar mower...

    Hi, I am working on a farmall c-21-P sickle mower. Specifically, I am looking for either a new or good used outer shoe for the bar. Part number on the shoe will either be a 455 558 R11 or it could be a version of MB 729 or MF 729. It uses 2 plow bolts to attach it to the bar. I believe the...
  20. T

    Farmall 2 point back blade. Need a lot of help....

    Well, last winter I purchased a 2 point blade for my SC (ebay). I new it would need a little help but that turned out to be an understatement. It is in pretty bad shape. So....I am probably looking for another two point blade that I could scrounge parts off of (big parts) :( The blade is...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top