(800) 853-2651
SHOP NOW

Search results

  1. D

    Gas leak

    I looked for the arrow it?s pionted the rite direction
  2. D

    Gas leak

    This i s what I went with for now with some Gasolia soft set thread sealer
  3. D

    Gas leak

    My To 30 leaks gas from the gas shut off. I ran to TSC today to get a new one the new one leaks worse than the old out of the fittings they are flare type fittings I tried some Teflon tape no fix I put a 3/8? quarter turn bras valve and reduced it to quarter inch rubber line wit a inline gas...
  4. D

    Hydraulic port

    Thanks that?s what I was wanting to check so I may just plumb in a quick connection fitting on the tractor that I can hook the trailer to to dump it
  5. D

    Hydraulic port

    So it?s pressure all the time when the pto is engaged the trailer has a single acting cylinder I didn?t know if the arms are chained down it the lever that controls the arms would operate this port or it has pressure all the time unless the arms are raised
  6. D

    Hydraulic port

    The To 30 I have had a hydraulic port on the side of the transmission that the former owner said ran the trip bucket loader and also from that hat a dump trailer that?s homemade that had single acting cylinders on it he said something about chaining down the hotshitch arms to make it dune with...
  7. D

    TO 30 rear end oil ? And 12 volt conversion

    I?m wondering how much gear oil the rear end hold for the 3 point hitch and transmission. And mine is positive ground and has a 6 volt battery in it and a 12 volt generator I need a battery I want to make it negative ground what can I do to use the generator for now I bought a 12 volt coil for...
  8. D

    TO 30

    The tractor came with a home made dump trailer with a hitch that locks the 3 point hitch arms down and it?s told that that is what is needed to make the trailer dump the tractor has a pipe to hook the hydraulic hose for the loader up on the opposite side of the transmission than the pto engage...
  9. D

    TO 30

    It has what looks like a 6volt positive ground system and a 12volt lgenerator on it and a 6 volt battery that is no good so I was thinking for simplicity a simple 12 volt negative grind system would work good probably changing the coil to a 12volt coil and check out the generator to see if it?s...
  10. D

    TO 30

    Thanks I have an over ride clutch for the pto already.
  11. D

    TO 30

    My girlfriend has a To30 that she wants to use on her small farm light brush hogging and maybe some grading with a box scraper. It needs a battery it has a 6 volt in it I?d like to put a 12 volt in it and change it to 12 volt neg ground for ease of use. And the three point hitch huds have a...
  12. D

    Remember Wardner 400 with add ons

    I had the opportunity to purchase Wardner's W650 with the fast hitch on it it's a nice strait old tractor just lacking paint this is probably its first winter undercover in a long time we home to eventually paint it up just to keep it from rusting more we plowed with it at plow days this...
  13. D

    Getting ready for plow days

    The fast hitch was not an option the previous owner built it out of IH parts it is bolt on so it can be brought back to stock form if wanted
  14. D

    Getting ready for plow days

    Never really worried about it it's out front of them and is far enough away from them to not worry about hitting. None of these are native to NewEngland they are a rare tractor in our area that's kind of the draw for us it seems like everyone has a H or M or C or super C WE like these big ole...
  15. D

    Getting ready for plow days

    Been working on the 650 for a few months now hot it over the winter the unrestored 600 was scrap yard destined a few years ago rebuilt carb and injector pump and it is the best starting smoothest running gas start diesel we have and the other 600 got an oil and filter change this spring
  16. D

    rice tires

    Looks good I'd like to find a set of 26 inch wheels and hubs to put on one of our 9's or 600's that old tractor looks good in her work clothes
  17. D

    WD 9 clutch assembly

    We sent ours out years a few years ago to a place called Kentucky clutch they had a quick turn around and the price was less than $ 200 to rebuild the clutch and pressure plate. We will definitely use them again if we need to do a clutch on one of the other 9's
  18. D

    propane tank exchange

    Just exchanged 2 tanks last week for the grill $20 bucks a pop the local hardware store gets $15 to fill em. The only reason I exchanged them is 2 of my tanks were out of date over 12 years old and the hardware store wouldn't fill them as I was out this fall and went to get one filled and after...
  19. D

    WD9 Rear Oil Seal

    Case Ih dealer can still get it we just got on this spring for one of ours but it's not 25$ it's a bit more. Now to find the time to work on it
  20. D

    Super WDR-9

    There is a company in the advertising section of Red Power magazine that makes and sells new liners and Pistons for them I have heard it's not a cheap fix
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top