-
P
jet star
I have a Jet star 3 that I am thinking of selling. It is a very low hr, original tires, very little wear, original seat. steering wheel, original paint, very good, I know of nothing wrong with it. any body want to comment on it's worth? thanks- pausn
- Post #1
- Forum: Minneapolis-Moline
-
B
walk behind mowers ???
I've used three or four different models in the 30" to 32" size and in my opinion those machines are *kind of* stuck in the middle as far as being optimal is concerned. The problem lies in the blade size. Having two short blades seems to make them work the most effectively in shorter, more... -
B
Rented a walk-behind trencher today
Engineering wise, they're on par with riders. Less weight? Yes, but you're taking a considerably smaller "bite" as well. Uneven traction? Pull the lever that locks the drive wheels together to essentially make the drive axle solid. Walk behind trenchers are incredibly efficient, well-designed... -
B
old bachtold mower
Any small engine shop should be able to repair that recoil in a matter of minutes. It is a Briggs engine...here's your engine on a early 60's David Bradley: Edit: Oops, didn't read the other thread. I see someone else posted the same photo earlier today. :wink: -
B
Lombardini diesel
Guido, Here's another link.... http://www.lombardinigroup.it/en_US/lombardini-products/air-cooled-diesel-engines/15-ld-225-s -
B
Lombardini diesel
Guido, Kohler engines acquired rights to the Lombardini brand back in 2007. Here's a link to another forum with a copy of the press release: http://www.lawnsite.com/showthread.php?t=204995 We've had hit-and-miss experience with finding accurate parts breakdowns, AND....dealerships that... -
B
Lincoln Ranger 10,000 bad stator?
Give these guys a call. Stators can be re-wound and it typically costs less than half the price of a replacement part. I didn't look up your model specifically, but a comparably sized machine runs ~$800-900. Even if you don't see your model listed, they'll still give you a quote....there are... -
B
Nitrogen in tires
We went to a camper/RV show last weekend and [i:2066805431]every[/i:2066805431] manufacturer with their wares on display had nitrogen-filled tires listed among the features. The amusing part was that they chose to not call it "nitrogen" though and instead shortened it up to "nitro". I've... -
B
Dead oil burner.. primary control?
You can easily see if the burner motor on a Beckett is good by wiring it directly to 120 volt power. Shut off all power to the furnace and then open up the junction box the primary control sits on top of. Locate the black and the white wires that run out the bottom of the junction box to the... -
B
free electricty
Watch and enjoy: http://youtu.be/Fv53K9MnDuM :lol: -
B
Generators
I've done it with an old single speed drill and a 4" angle grinder. Nope, variable speed power tools usually won't work. -
B
Generators
Unfortunately, the "throw it away" mentality has infected lots of people....including many of those that allegedly possess tools and skills. Depending on the reason for the "no output" situation, it may very well cost more to repair than the unit is worth. On the other hand, without hands-on... -
B
Wood boiler fluid ??
If by plumbing antifreeze you mean propylene glycol, that's what we're required to use in jobsite hydronic heating systems. Conventional ethylene glycol, (the green stuff used in automotive applications), is prohibited. Propylene glycol is much more expensive than ethylene glycol. We buy it... -
B
L.B. white heater
Is it a torpedo-style heater or one of the box-style barn/tent heaters? The box type should get you ~$200-275. The torpedo type should be worth ~$100-175. Until a couple of years ago they were worth quite a bit more. A lot of work sites now restrict the use of direct-fire heaters. They also... -
B
Furnace problems...Bryant, Grrrrr.
Our Bryant Plus 90i, (96% I believe), was installed 14 years ago. About a year in, the installing dealer came out and replaced the inducer/blower at no cost to us. It still worked, it was just noisy as it spooled up to speed. This year, I replaced the accordian-style rubber drain hose for the... -
B
ethanol fuel alternatives
Just a heads-up here folks, I responded to the video on YouTube in the comments section. I explained in detail how their clip is misleading at best. A rep from Starbrite responded with more nonsense, which I then refuted as well. Guess what? The "owner" of the clip, (Starbrite Corp.)... -
B
ethanol fuel alternatives
That is funny. It's equally hilarious that he started out his demonstration by saying the fuel sample he had was taken from a boat. He went on to mention that boat tanks are vented to atmosphere, and since they are....they're especially susceptible to having ethanol blended fuel "suck" moisture... -
B
ethanol fuel alternatives
Why the attitude? Someone asked a question, and people responded. Here's my problem with ethanol use myths: There are PLENTY of individuals and companies that are more than happy to separate consumers from the dollars in their wallets by marketing products that allegedly "cure" the ills of... -
B
ethanol fuel alternatives
****I just bought a gravely zero turn mower and the book and the store manager says it likes non ethanol fuel. The nearest place to get it is 60 miles away. Are there any additives, etc that can be added to the ethanol crap to make it useable in a non-ethanol engine ?**** Here's a link... -
B
Re: Smith 100 Portable Air Compressor
"there is no link to click on and copy and pasting does not work." Once you click on the link, that takes you to the MediaFire page. Under the manual's file name on that page, there's a green "download" bar to click on. Link: http://www.mediafire.com/?3m7s7mi9m0l3xix Depending on...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy