(800) 853-2651
SHOP NOW

Search results

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

  1. S

    Swapping sos to sos

    Hello, I am getting ready to pull my sos out of my 64 hd 4000 and replace with another sos. Is there anything I should be planning on replacing? Gaskets or anything like that? I removed the back hoe off but still have the loader on. I know to wedge the front axle so it doesn t flop, and I...
  2. S

    Swapping sos to sos

    To add too, this is a 64 hd with no pto and I m pretty sure no 3pt too from the factory. It has a block off plate for the pto and I believe there are no arms for the 3 point but I can t remember without going out to look
  3. S

    Swapping sos to sos

    Hey, it s my sos we talked about when I bought yours. I don t know if it s sucking the fluid out, but the transmission fluid ends up in the rear end. This happened over a year ago, and I just now have time to really dig in and swap transmissions. I know the one from showcrop is really...
  4. S

    1963 4140 HD Ind - Oil leaking from trans inspection pla

    That s good to know. I was hoping to use the frame while splitting it, it has two long beams that seem like they could slide apart to keep everything lined up. I plan to drop my backhoe and then get the front blocked up so it can t tip and then try to slide it on the frame pieces
  5. S

    841 with 724 Loader keeps chewing drive shafts

    I had this same issue. I ended up replacing the bushings and that helped, it hasn t come apart since then
  6. S

    1963 4140 HD Ind - Oil leaking from trans inspection pla

    You can t split a hd? How come? I need to replace the trans in my hd and had planned on splitting it to do so
  7. S

    Ford 4000 selectospeed no spark

    Does this have the push button start? Is the park wire killing the voltage to the coil. Do you have the right coil? Are you getting proper voltage to the coil? I believe those sos have the park switch hooked up, and won t allow for starting if it s not in park. You may want to carefully bypass...
  8. S

    Swapping SOS trans- tips?

    I am going to swap out my leaking/not working SOS with another one that is in very good shape. I have both service manuals, but I also have an industrial with FEL and backhoe. I can remove the backhoe pretty easily but I am hoping to leave the loader on. I can see plenty of bolts and the...
  9. S

    Broken inching pedal

    I just did the same thing on mine. I was able to easily remove the old one, however getting the new one in was a challenge. It will not fit straight in, I ended up grinding it down on an angle to get it started, and used a magnet to pull it through. I have the roll pin back in to hold the pedal...
  10. S

    Splitting an industrial

    I will have to split my 1964 industrial at some point. I have a few questions. I know it s somewhat easy to get the backhoe off, I figured out the clamping system and lines. I m guessing blocking the backhoe under it will help support it from falling over when it s disconnected. My real...
  11. S

    Select o speed leaking into rear end

    I m pretty sure it s the seal too. Fluid came out the dipstick from it sitting I think facing uphill. I wonder if I fill and park it on level ground if it will be okay. I have a trans showcrop sold to me, it s just finding a place and time to split it. I figured out how to get the back hoe off...
  12. S

    Select o speed leaking into rear end

    Hello, After playing around trying to figure out why my 1964 4140 stopped moving and would barely move, and adjusting the bands 3 times, I took the top cover off and saw that there was basically no fluid left in the transmission. Enough to make it engage but not actually move. I then noticed...
  13. S

    Select o speed leaking into rear end

    I finally got time to take the side cover off. I can see the leak. I hope the video posts. Is this the seals or the lines leaking? [video play=false:455ded2fb5]https://forums.yesterdaystractors.com/videos/mvvideo104297.mov[/video:455ded2fb5] This post was edited by sony224422 on 04/07/2023...
  14. S

    Anyone have a parts SOS transmission?

    A branch broke my inching pedal shaft, it sheared at the transmission. I am looking for the shaft and the spring if anyone has them.
  15. S

    Anyone have a parts SOS transmission?

    I would love to do that but I am in CT haha
  16. S

    Anyone have a parts SOS transmission?

    I did find everything on ebay. Thank you
  17. S

    Anyone have a parts SOS transmission?

  18. S

    Select o speed leaking into rear end

    Did these come from the factory with a block off plate? If they did, how did the proof meter work? If it is leaking I do have another transmission, but if I don t need to split it, I would like to not. It s stuck in a very inconvenient spot at the moment. I am hoping it is the oil pressure...
  19. S

    Select o speed leaking into rear end

    You sir are correct, there is a pump. I don t use the 3 pt though, in fact im not even sure why there is one. But either way here are the pictures.
  20. S

    Select o speed leaking into rear end

    I am not sure I have a hydraulic pump on the side of the tractor. i will have to check on that. since this is an industrial 4140, is there anything running off that pump? I have the front crank mounted pump running the loading and backhoe
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top