(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. M

    JD 5020 FUEL TANK REPLACEMENT

    I found a guy in Iowa with a decent tank. Only had 2 pinholes to patch with JB Weld. Thank you everyone for all your replies and help. Much appreciated. Got in the fields this weekend and everything seems to be holding good.
  2. M

    JD 5020 FUEL TANK REPLACEMENT

    After sand blasting the bottom to see if we would find more than the one hole you could put the tip of a pen through…… we discovered about a dozen other pinholes. I don’t know if it’s repairable. This is a new issue for me so I have no experience with repairing tanks or knowing someone that can...
  3. M

    JD 5020 FUEL TANK REPLACEMENT

    Don’s Tractor Salvage was a no go! Said they haven’t seen a decent 5020 tank in some time.
  4. M

    JD 5020 FUEL TANK REPLACEMENT

    I will right now! Thank you.
  5. M

    JD 5020 FUEL TANK REPLACEMENT

    First time posting on the JD forum. I have been trying to find a fuel tank for a 5020. It's a 1966 model. I have exhausted every avenue known to me and cannot find anything. Any help would be greatly appreciated. Thank you in advance.
  6. M

    856 WHEATLAND HYDRAULIC VALVE

    THANK YOU. I WILL START THERE. HAVE A BLESSED EASTER.
  7. M

    856 WHEATLAND HYDRAULIC VALVE

    I RECENTLY BOUGHT AN 856 WHEATLAND DIESEL THAT HAS BEEN OVERHAULED. EVERYTHING IS WORKING GREAT, BUT ONE OF THE HYDRAULIC VALVES IS NOT WORKING. THE 2ND LEVER (OUTSIDE) WORKS FINE BUT THE 1ST (INSIDE-CLOSEST TO SEAT) LEVER SEEMS STICKY AND WILL NOT WORK. THE LITTLE TINY PLUG IS MISSING IN THE...
  8. M

    1964 CASE 730 gas not CK

    Ok. Thanks guys. Sounds like a winner, we will just have to come to terms on price. I will post pics if it goes my way. Thanks again.
  9. M

    1964 CASE 730 gas not CK

    CASE NUTTY- Would this not be a good PTO tractor? Is it not Live PTO? I do run the Tedder quite a bit in the summer.
  10. M

    1964 CASE 730 gas not CK

    It's been awhile since I've posted, but I ran across a 1964 non Comfort King 730 gas dual range. I've been looking for a cheap chore tractor to use in the winter and for the Tedder and V Rake. It looks to be in really good shape. All original with clam shell fenders. I can't find much about this...
  11. M

    Need 18.4x38 tire, rim and wheel

    I just got this 806 diesel wheatland from Canada and it has mismatched tire SIZES on the rear! One side is 18.4x34 and the other side is 18.4x38. I hope that the tractor wasn't used like this for an extended period of time, but I am having trouble finding a wheel, rim and tire up here in...
  12. M

    International 806 RD fuel pump

    You know, the worst thing about it is that I knew that the pump leaked! The guy never told me that it did until I made the 600 mile trip to pick it up. But I saw it right away when we started it up. I should have just left and cut my losses, but I was stupid and nieve, thinking that it would...
  13. M

    International 806 RD fuel pump

    Thanks Dwag. I called them and they are super nice to deal with. $1520.43 for a rebuilt. They definitely suggested staying with the RD pump. They said that a Roosa pump with conversion can get REALLY expensive. Thanks for all the help.
  14. M

    International 806 RD fuel pump

    Thanks fastfarmall. I really appreciate it. Dan
  15. M

    International 806 RD fuel pump

    I am wondering if anyone here has experience rebuilding RD fuel pumps? I just brought back an 806 wheatland from Canada and the RD pump leaks like a seiv and the repair shop says that it needs to be rebuilt or replaced with a Roosa Master pump! I have heard that RD pumps will out perform Rossa...
  16. M

    930 Wheatland Drawbar

    I have a Case 930 Wheatland that I am having trouble finding a drawbar, roller and cast iron bracket for. The cast mounting bracket under the tractor cracked and I didn't see it and when I was plowing, I broke the bracket and pulled the whole drawbar right off the tractor! Does anybody know...
  17. M

    IH #82 Combine pros/cons

    I have the opportunity to buy a IH #82 combine. It looks to be in really good shape. Still has almost all the decals and stickers. Hasn't been used for several years and I have no experience with ih pull type combines. What are the pros/cons and things to look for. The guy is asking $975 for it...
  18. M

    O.T. Safety on some new guns, looking for opinions.

    Before you buy any handgun, you should find a gun shop where you can try many different ones. That's what I did. I chose the Smith&Wesson M&P Shield 9mm. It has an external safety if you want to use it. It has been a perfect carry pistol. I HIGHLY recommend that you try one. As with my full...
  19. M

    930 and plow pictures

    Finally got to try out the new 5x14 A-series plow behind the 930 yesterday. Worked Flawlessly!!! I pulled in High range 1st gear and rolled right along at 6-8 inches deep. Soil is pretty sandy, so I couldn't even tell the plow was behind me! Ha!! Got to teach my 14 year old daughter to plow too...
  20. M

    Case plow hitch setup

    Hey guys, does anyone have any literature on how to set the hitch right on an A series plow? Or where I could get a manual? I bought a 4x14 and a 5x14 this spring and I'd like to get them set up right. Pictures should be coming in a couple weeks! Thanks in advance for your help. Dan
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top