(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. EX Deere Farmer

    Questions: wrapping DRY hay (round bales, single cutting, grass w some legumes)

    I have wrapped dry hay for close to 20 years now. The key is like Bruce said" let it go completely through the heat/cure cycle. What little rain you will get on the top does not effect it as much as the internal heat and moisture during curing. I have some really dry third crop orchard grass hay...
  2. EX Deere Farmer

    IH 806 sleeves

    Thanks for the information on the manual. I ordered one from Stiners.
  3. EX Deere Farmer

    IH 806 sleeves

    We sent the injectors to a pump shop to be rebuilt. The injection pump was just done three years ago.
  4. EX Deere Farmer

    IH 806 sleeves

    I am trying to help a neighbor get a IH 806 running. One piston scored the sleeve really bad. So we are thinking of doing a complete overhaul. Everyone local is telling me I will need to take the block to a machine shop to get the sleeves installed. I have never done an IH dry sleeve motor but...
  5. EX Deere Farmer

    485 front end loader ID

    I will second finding a hydraulic repair shop and just putting a kit in your cylinders. If that is not possible then look at Bailey hydraulic for new. Also check out Surplus Center Lincoln, NE. There should be a local mechanic that would know how to take you cylinders apart and find rebuild...
  6. EX Deere Farmer

    Who made IH wagon running gears???

    I made a round bale mover for a neighbor 10-15 years ago. He put it on an Electric running gear that has eight bolt hubs. Long story short he let the front spindles frees up and did not know it. So he hooked up to it empty and took off without looking back (stiff neck at 74 yrs old) LOL He...
  7. EX Deere Farmer

    Waterloo 4040 with cab

    That is about the going market for a running cab loader tractor in fair/good shape. I watched two sell last month and they both were in the low twenties without a loader. These pre-emission tractors are going crazy right now with the cattle market so high.
  8. EX Deere Farmer

    Yet Another 2cyl steering thread

    I would bet your problem is in the control valve. They get worn and leak internally. They then super heat the oil and the system quits working. It seems you oil is heating up pretty fast. I would go into the control valve.
  9. EX Deere Farmer

    Chain coupler

    I have found that just regular diesel fuel works pretty good on these type of coupler chains. Most lubricants will not stay in the chain any way and they can attract dust/grit that wears out the chains. The diesel fuel mainly cleans the chain while not usually attracting things.
  10. EX Deere Farmer

    JD 6715 MFWD steering cylinder reseal?

    You take the fitting that is the furthest away from the ram out of the cylinder. The push the ram down to where you can see the bottom of the ram through the fitting hole. There is a snap ring you flip off into a lower diameter. That will allow the ram to be pulled out of the cylinder. JD has...
  11. EX Deere Farmer

    JD 2955 hydraulic problems

    If you have a valve on the right hand side that a cable controlled joystick operates, that is were you need to switch the hoses. Where it is fed at the rear SVC is just a supply and return. If that supply was the issue both bucket and lift cylinders would be effected the same
  12. EX Deere Farmer

    Silos I also am not DB Jim

    One thought that often goes through my mind is that things today seem old and have no value, were someone's "Dream" when they were built. I bet that was "state of the art" when it was new.
  13. EX Deere Farmer

    Correct sheen of black paint for plow

    If your talking about the black backs of the bottoms and hitch parts then Blitz black. If your wanting to paint the wear side of the plow then the soft black coating is made for that, as it will wear off quickly when the plows are used.
  14. EX Deere Farmer

    John Deere 24t plunger head safety stop

    Then the needle frame is not locked into the home position. That lock is to protect the needles. Your flywheel shear pin may not be the only pin sheared. There is one on the needle lift linkage. Also the pin may have sheared due to the plunger pulling hard and the knotters may have tripped at...
  15. EX Deere Farmer

    John Deere 24t plunger head safety stop

    Bob has it correct. The needle frame holds the stop out of the bale chamber. As soon as the needle frame move forward to start making a knot the stop enters the bale chamber. This is to stop the plunger hitting the needles while they are in the chamber. The needle can get out of time or shear a...
  16. EX Deere Farmer

    IH 806 diesel engine

    Steve Thank you for the information. The trouble is the rest of the tractor is pretty ragged out. I think I can find him a better complete tractor for less money than fixing his.
  17. EX Deere Farmer

    IH 806 diesel engine

    A good friend locked his IH 806 last fall running a 13 inch grain auger. What else used the D361 diesel motor. The rest of the tractor is not worth a total rebuild but maybe worth a used engine. I have not found any good tractor motors.
  18. EX Deere Farmer

    1972 John Deeres

    I own my Grand Father's 1971 JD 4020 it has 7200 original hours on it. It has never set outside over night since he bought it new. His brother bought a 1972 JD 4320 as he wanted the extra horsepower and turbo. I was able to buy it off him when he moved into an assisted living condo. He would...
  19. EX Deere Farmer

    Oliver 1650 high speed serial/model numbers

    Thank you that was the information I was needing. I will let you guys know if I have any luck.
  20. EX Deere Farmer

    Oliver 1650 high speed serial/model numbers

    I know that some of the Oliver 1650s had a faster or lower rear end ratio. I used to have the information that listed the numbers to look for. I can not find that information now. I have found an Oliver 1650 with a blown motor. The owner said he though it had the faster drive line in it. I...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top