(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. Farmall m farmer

    856 delco 10si conversion questions

    I will check tomorrow
  2. Farmall m farmer

    856 delco 10si conversion questions

    At the back of the alternator it’s charging 14.3 volts
  3. Farmall m farmer

    856 delco 10si conversion questions

  4. Farmall m farmer

    856 delco 10si conversion questions

    The removed alternator was a 10dn what do I have to do at the voltage regulator exactly? Do I unplug the plug going to it?
  5. Farmall m farmer

    856 delco 10si conversion questions

    I used the existing exciting wire that comes from the dummy light and it’s hooked to the number 1 terminal than made a jumper wire between the battery lug on the back of alternator to the number two on the alternator and it works fine and hooked up the ground
  6. Farmall m farmer

    856 delco 10si conversion questions

    I want to put a 10si on it but the original plug was gone and somebody just put spade connectors and they were unhooked so how do I hook it up I found a thread on here but it was confusing to me what is the best way to hook it up pictures would be great
  7. Farmall m farmer

    Front loader on a 3010

    I would not use the SCVs on the tractor to run a loader are 4320 was set up that way and it wore out both SCVs and there not cheap to rebuild it would be cheaper to have a second loader valve
  8. Farmall m farmer

    57 Cub Lo Boy sputters and dies

    If it’s not a fuel flow issue I would replace the coil when coils get old sometimes they will get hot and stop making spark
  9. Farmall m farmer

    Cornwell tools what's your thoughts and opinions of them?

    I have a screw driver set that I got on sale from a tool truck I don’t buy that nice of tools ever but for the price I thought why not I love them the handles are comfortable and I’ve never bent any of the flats before
  10. Farmall m farmer

    JD 4320 update

    Don’t know if you remember or not but I was working on a 4320 diesel and there was a few thing wrong the three point did not work and the SCVs needed rebuilt so the hydro fluid had water in it and when I cleaned the pickup screen it fixed the three point don’t ask me why I don’t know haven’t...
  11. Farmall m farmer

    John Deere 4320 SCV valve

    I did not do that I will do that why I found odd was as soon as I let the control handle back to neutral position it bleeds off immediately. I am planning on seeing if Deere can just resurface them for me. And yes I am planning on using a dial indicator to check clearances
  12. Farmall m farmer

    John Deere 4320 SCV valve

    Update I put a hydraulic pressure gauge in the SCV and it read 2300 psi I still think I’m going to give it a shot at rebuilding them and see if I can get them to seal up again and get them adjusted
  13. Farmall m farmer

    John Deere 4320 SCV valve

    So the actual hydraulic part of the valve is fine it’s just the detents can I just put new detent ball and spring inside without taking the valve out of SCV?
  14. Farmall m farmer

    John Deere 4320 SCV valve

    So the tractor SCV valve the detents inside do not work I saw you can buy a rebuild kit with new valves from worthington ag parts is this something that is rebuild able by just putting seals in it and put back together or is this something that a dealer should do or just buy a rebuild SCV valve?
  15. Farmall m farmer

    484 international tractor help

    Is the draft lever linkage broken or anything out of the usual?
  16. Farmall m farmer

    484 international tractor help

    Sounds dump but did you try standing on it to put weight on it from my limited knowledge of three points they don’t push down just go up and the weight of the implement pulls it down
  17. Farmall m farmer

    Case 580c backhoe steering hand valve leaking

    I have a service book for it I guess I never looked in it
  18. Farmall m farmer

    Case 580c backhoe steering hand valve leaking

    it has bad leak coming from the bottom of the steering shaft and the steering wheel has a lot of play in it but I know it’s not tie rod ends as I have already replaced them is the hand valve a throw away part I don’t see like a seal kit for it online but a new ones about $900 so I would think it...
  19. Farmall m farmer

    Advice for a young farmer

    Honestly I would make hay and sell hay you would make more money at least in the market are here don’t know about around where your at
  20. Farmall m farmer

    Advice for a young farmer

    If your going to do non gmo beans you better be prepared for weeds and lots of them that’s why we stopped growing non gmo are 9760 wouldn’t choke it down
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top