100 plow

[Anonymous-0]

Working on what I think is a 100 plow. I am wondering if the coulters that look like joiners are supposed to have movement from side to side so you can go around curves. This is the second plow I have seen(both 100's settiung in weeds) with this type of dish like coulters with a small moldboard attached to it. I assume it would work like a cover board to cover trash.The plow doesn't have any red color, just green and has 15 inch tires so I assume it is a later model that come out with the supers. If anyone has any info on these coulter please pass it on. We have had oliverplows since 47 and all had regular coulters. Thanks, TC

 

[no-bama]

If you say that the coulter is like a dish then I assume it is a disk. The disk should have no side to side movement. however the straight coulter has alot of side to side play

 

[Art Massing]

TC,
I"m just finishing a the rebuild of my Plowmaster 100. I"ve attached a picture of the new 16" coulters I used on the original hubs. I also had to rebuild the cone bearings.

The original coulters on mine were fluted but were worn down to 12". I have a NOS set of 18" fluted coulters that I plan to use as soon as I can locate a set of EP-845A Yokes.

My parts manual doesn"t show a curved coulter like yours but I know Yetter made curved coulters as after market for most plows.

Good luck,

Art