1105 1968-69

[Todd R]

Is it possible to bleed the hydraulic system on the 1105 l replaced the line under the seat and I don't see any or little fluid in the line as it lowers and raises is there any place else to check for transmission fluid other than the fluid filler next to the gas tank I also noticed with the filler cap of the fluid is kind of rolling is this also normal

 

[Anonymous-0]

An 1105 is newer than 1969. I believe they came out in 73. Dave

 

[brianriver]

Really no place to bleed as the fluid dumps back into the transmission from control valves and pumps. It should bleed as power steering and remote outlets are cycled. Is the oil foamy? Oil churning as you look into the filler is normal. If it is the three point lift arms you are referring to, you should be able to crack the fittings on the lift cylinders, raise the arms and close the fittings when a steady stream of fluid comes. Post back and let us know results or other questions. Brian.