123 Ih engine bigger sleeves?

[Anonymous-0]

I'd rather turn down the mains. They aren't going anywhere and I'd much rather have block integrity. What's your rid length and deck height? Three are a lot of pistons in that size...I have a bunch of books with specs.

 

[CLIFF S]

Andy,

the Size you asked about is 169 cid or the same B&S as a 300 Farmall is stock.


Cliff S

 

[CGpuller]

Search archives on stock block options. Bigmotors has a good recipe. He emailed it to me once but I lost it.
Untitled URL Link

 

[Philip moline]

169.215 cubic inch

 

[VicS]

If you are going to make it bigger, go all the way, Someone on here knows how big, don't tell everyone how big you are, let us guess. The head gasket is easy there is company's advertising in the Hook and Antique Puller. Read Jim Benjamen's article in the Hook about stroking your crank. Call him or someone else and talk to them. I make a mistake and used 1600 cc Mazda big end, should have used Honda, you can find about any length of rod with a Honda big end and a Nascar little end. Don't worry about the o-ring on the bottom. The new machine tools make a round enough hole they won't leak. We put the sleeves in the freezer and pushed them in with a press. then bored to size, then honed to final size. Don't go to a car speed shop if they don't act like any of this will work.
Vic

 

[martyinmi]

Whats a RID?????????