135 power steering

[TTS in Mo.]

I have a 135 with power steering that doesn't work. I bought a shop manual and a operators manual so I could work on the tractor. When i look up procedure for bleeding air and checking fluid level I found that the two manuals don't even agree on which fluid to use! SM calls for spec m-1110 and the om calls for hydraulic oil m-1129-A. Also the pictures show the power steering pump on the left side of the tractor. Mine is on the right side and looks like their picture for the diesel. I have the 3 cylinder perkins gas motor. I am totally confused and not sure where to start with all of the seemingly contradictory info in these manuals.Any help would be greatly appreciated.

 

[trac]

Does your manual cover both engines if it does that may be why. Don't know about the oil but on my ford i had to turn the wheel all the way to the right momentarily (2 sec.)then the same thing to the left. It must self bleed itself?

 

[Anonymous-0]

The Perkins gas and the Perkins diesel are the EXACT SAME ENGINE BLOCKS....Power steering pump will be in same location on both.

 

[TTS in Mo.]

I'm still not sure which fluid I should use. So do you think maybe they just changed the numbers some where along the line and they are the same fluid? I guess I will start looking to see which is available and go from there. My tractor steering system is bled the same way-by turning wheels left and right.Thanks a lot for your help. This is a wonderful site for getting information.