135 won't keep running

may man

New User
I have a massey 135 with the perkins 3 cylinder gas engine that my Dad bought new in 1970. The past few weeks it has began to die for no apparent reason. so I thought no problem I'll get a voltage regulator. No change. Put on a new coil ran for a little longer then quit again. I noticed that the coil is not getting power. I've tried to trace the wires but was wondering if they make a wiring harness for this model. Hope that may help the problem. Any advise would be helpful. Thanks
 
My MF-135 needed a new ignition switch a couple years ago. Now it runs. Could be condenser, could be loose connections, could be a pinched wire, the one to the distributor is a common problem.

Gerald J.
 
(quoted from post at 11:40:24 06/07/09) I have a massey 135 with the perkins 3 cylinder gas engine that my Dad bought new in 1970. The past few weeks it has began to die for no apparent reason. so I thought no problem I'll get a voltage regulator. No change. Put on a new coil ran for a little longer then quit again. I noticed that the coil is not getting power. I've tried to trace the wires but was wondering if they make a wiring harness for this model. Hope that may help the problem. Any advise would be helpful. Thanks

Hello,

You could try a jumper wire to the coil for testing. If this cures the problem, then start tracing what is causing the coil to not get power. Otherwise you will need to first figure out the part causing the problem before you go and replace any more components at random.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top