135

[drdarren]

what hydraulic fluid is normally used in it?
what weight motor oil for south carolina?
as for wheels, is there a truck or car wheel that has the same bolt pattern as the front wheels on it with out having to do any drilling or minimal drilling?

 

[drdarren]

also the whole air filter assembly needs to be replaced along with the dust cup, i looked on here and A&I, i coudlnt find the assembly, maybe i was just blind. (help)

 

[Anonymous-0]

MF Perma-Tran XL 821 is latest OEM oil and the best oil to use in the trans/diff and hyd. and 15-40 diesel oil would be good for engine oil. I've tried other oil in hyd's on my 135 but with the MF Perma-Tran there is a noticeable improvement in performance.
What's wrong with the factory rims and the air filter assembly? For any parts go to a dealer and see if they are available in the Agco Heritage line. Dave

 

[Joe Ferguson]

If your tractor is equipped with Multi-Power and/or independant PTO Perma-Tran oil "must" be used otherwise MP and IPTO components will fail.


My 2¢

Joe Ferguson

 

[drdarren]

i want wider tires for the front mowing in my yard, and the canister top is missing and the rest is bent up, not sure how it got done. i was looking online here, want options for prices.

 

[Joe Ferguson]

For wider tires you can reverse the rim then the tire will be farther from the spindle wider tires may be installed. This process is described in operators manual to adjust track width for different applications. It will give more stability in slopes.


My 2¢

Joe Ferguson

 

[drdarren]

no i dont want a wider stance, which i know how. i want a wider tire on the front wheel. i dont want the ag tires to dig in my grass. i have two 15 inch tires sitting in my garage that would be great on the tractor, just nee to find a wheel.

 

[Anonymous-0]

The tractor won't be that heavy on the front. See if a tire shop has some old 16" tires that could be put on your wheels. Dave

 

[Anonymous-0]

Check with tractor wreckers for a used air cleaner assembly. Dave

 

[Anonymous-0]

I've been using NAPA Hy-Tran in my 150 since it was new. Works great, no wear problems, no seals leaking, lift is strong. Easy to get, priced competitively.

15/40 diesel rated oils in the engine all year 'round....I use Penzoil. I HIGHLY recommend getting the spin on filter head and swapping to a spin on filter. I use NAPA/Wix filters.

Most any 6 lug impliment wheel will fit. They're available in a variety of offsets (dish) and wheel diameters. Any GOOD farm store/equipment dealer should have access to what you need.