1370 case

[tom 88]

where can i find rebuild kit for power shift ,springs o rings, gaskets? i live in michigan can not find at any dealers
tom 88

 

[Anonymous-0]

find a dealer that gives a crap then let Case know about the ones that don't!

 

[Eagle Doc]

There is a seal kit available from Case that includes piston seals and some other O-rings. Other than that you just get each part separately.

 

[Roger Link]

We can get you anything you need,just make list,or Email us

 

[Roger (Mi)]

Case had some problems with the 1370 power shift with bolts shearing in clutch packs. Case put together an update kit which corrected the problem. If your 1370 doesn't have the update kit already installed, make sure to request that kit at the CaseIH dealer.

 

[tom 88]

thank you i didn't know that

 

[Jim B]

Carleton Farm Supply can get anything needed for your Power Shift rebuild, if CNH has it in stock. Talk to Greg, 734-654-2228.

 

[Jim B]

Oops... That's 734-654-8222. Or 654-2638
Just gotta learn not to totally rely on memory, guess my gray hair sometimes clouds the brain cells.

 

[Anonymous-0]

The problem with the bolts shearing was actually a problem of assembling with oil or lube on the bolts; the loctite would not hold. Buy you some cleaner that does not leave any residue on your hand when sprayed on it. The bolts in question hold sun gear planetary in; three small bolts later updated to 1/4 in inch I believe. Anyway hold bolt with allen wrench and spray clean, BUT DO NOT TOUCH with bare hand again, oil from hands with stop loctite from working. Assemble without touching or reclean and start again. The later model powershifts went to square cut o-rings which tend to hold more pressure. If you don't get bolts in right one or two will back out and fall down between sun and planetary gears$$$$$. Hope this helps bobbyg