1931 John Deere D valve seat cutter

[MillTrac54]

Anyone know where you can find a valve seat cutter large enough for the cylinder head on a 1931 John Deere D? Valve diameter is 2 and 3/4" with a 5/8 stem.

 

[Greg_Ky]

Goodson
Poke here

 

[J. Schwiebert]

Are you needing to install valve seats? Do you need to correct valve stem height? How about more details. Do you have any valve equipment now?

 

[Butch(OH)]

The pilot is a separate item from the
cutter. You need to know the seat angle.
To do the job right you need a top angle
and bottom angle cutter also. If the seat
is 45 then a 30 and 60 is needed also. For
what you will have in tooling pay a shop
to do it unless you will be using it more
than once.