2394 not shifting

[Anonymous-0]

A friend has a 2394 with a 6 spd power shift. He was plowing and suddenly lost all the even gears on the power shift. 1,3,and5 still work fine, but nuthing in 2,4 and6. any ideas anyone? Checked the fuses on the dash, only one said range and that one is good. Any other fuses? Looked for wires that might have been pulled off, but there is nuthing that we can see out of place.

 

[case trader]

probably the first thing to come to mind would be the printed circuit board in the front part of the console, i've not found a way to ck. them other than swapping it out, someone was selling new ones on ebay a while back 90 bucks i think, i just bought one for this reason (easy stuff first)

 

[AFL]

Had the exact same thing happen a month or two ago. First thing I did was replace the circuit board that case trader mentioned, but there was no difference. Turned out it was a disconnected wire to the solenoids. I know you said you looked for wires out of place. Look again under the steps to the cab and make sure there aren't any disconnected wires near the solenoids.

I posted this question on another site, here's the link if you'd like to look at the replies I got. Good luck.
2394 shifting