267d diesel engine

[Brent Rehm]

I need help I'm putting back together a case 267d i4 engine with balancer oil pump, how do I clock crank rotation to oil pump rotation. No timing mark on crank gear? I assume needs to be clocked?

 

[RGMartin]

(quoted from post at 09:31:57 12/12/11) I need help I'm putting back together a case 267d i4 engine with balancer oil pump, how do I clock crank rotation to oil pump rotation. No timing mark on crank gear? I assume needs to be clocked?

Put 2 of the pistons TDC using timing marks. Let the weights in the balancer hang down and bolt it up. Gravity will do the work for you.

 

[RGMartin]

(quoted from post at 15:21:44 12/12/11) Thanks Center two or outer two? probably doesn't matter? Brent

Doesn't matter. The engine spins half as fast as the balancer so it will be right in either place.

 

[Brent Rehm]

Thanks Center two or outer two? probably doesn't matter? Brent

 

[Eagle Claw]

there are timing marks on the gearon the crank and on the gear on the pump Line them up.

 

[Anonymous-0]

I think you better find the timing marks and line them up ( yes it has them), get it wrong and it will jump off the ground when you start it up!

 

[george md]

Brent,

Here is a page from a 730 service manual,

it is for a 3 gear balancer ,if you have a

later tractor you will have a 2 gear balancer.

They are similar , but the balancer housing

is turned around and plumbing changed to

match.

george

<p align="center">

</p>