2N

[ken in iowa]

Where do you put hydraulic oil into a 2n.. my ford manuel from
smiths old time ford is back ordered.. Where do you drain the oil..
and be specific I have never owned a ford before.. Thanks

 

[Charles Krammin]

The oil goes in by the shift lever, it flows to Hydraulic chamber and the to differential. There is 3 drain plugs underneath fo all 3 of the chambers. Youuse a "universal gear-hydraulic oil, such GL-5
Charles Krammin SW MI

 

[Bruce (VA)]

Check out tips 3 & 4 at the link below.

Try this site or nnalert's for parts & manuals.

See tip # 39 for my suggestions on manuals.
50 Tips

 

[ken in iowa]

Thanks Bruce.. I ordered the FO book and I have a parts manual book from Steiners tractor parts.. The FO book is back ordered and its such a nice day in Iowa thot would get some things done..

 

[Anonymous-0]

Ken,

We have them in stock if you can't get it from Steiner in a reasonable timeframe.

Tim

 

[rluscomb]

I use a 90w gear oil in my hydro/tranny works really good and less noise from the different components/gears. However I do live in Florida so I can get away w/using heavier oil. Had to put my two cents in. Happy New Year.