3 Point Question

KLanders

New User
Location
Greenville Ohio
On my TO-20 I can not raise or lower the blade on my 3 point when the clutch is pushed in. Is that the way it is supposed to work?
It works well up and down, just will not do anything when I have the clutch pressed.
 
The to35 introduced Live PTO where partially using the clutch stopped the tractor while letting the PTO continue, pressing all the clutch stopped both. 3pt worked the same way.

If you have a -20 or -30 then be sure to get an over running clutch for the PTO when using a brush hog.

.
 
When dad bought a new TO-20, the H.Ferguson dealer installed a Ford live power adapter in the shaft to the differential. It used about a 6"D clutch attached to what looked like an old Ford gear shifter via the side plate. Push the shifter forward, tractor stopped and left PTO running.
Regrettably I let a smooth talker talk me into selling that tractor.
It got busy when reaching the end of a field when bush hogging. With one hand you steered, manipulated the 3-pt levers and with another hand held the "live power" shifter forward. _ WAIT that's 3 hands=busy. I can't add a picture due to a computer crash about 30 yrs ago.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top