30.5 x 32 needed

[Rwolfejr]

Looking for a worn set of Firestone 23 degree bar tires 30.5 x 32's. Also need two sets of 32" rims of enough combined width to make a set of widened rims for same. It doesn't matter what the rims are supposed to fit because I'll be modifying the centers anyway. Going to center the 32's over a pair of 26's I have and run my 26" hubs. The rims do need to be sound though. Don't want ones that are rusting out. The tires are currently my biggest concern. Not cracked up and about half the bar life would be sweet. I'm in Western PA but will be traveling from Dallas area back to PA at the end of March so could rent a bigger ride and swing by to pick up if can find something between there and here.
Let me know if any of you have anything that fit the bill.
Thanks,
Bob

 

[Shawn W]

I got 2 firestone 30.5x32 23 degree tires i took off my Case 4890, laying out back on a pallet. The have about 15% tread and they are radials, I'll sell them for 20 bucks each and will load for you. Located in east central Illinois about 15 miles south of I-74. But i dont have any rims.
Shawn

 

[Anonymous-0]

I have a set In Tunkhannock ,Pa.
call George at570-288-6219

 

[Anonymous-0]

I've got a set of cut and a halft 30.5x32's on 9 bolt aluminim rims. $1800

 

[Anonymous-0]

have a cut set of 30.5x32 on rims ready to go..firestone 151.a few cords but very hard asking 750. 402 286 4248

 

[Brian/Pa]

dont be giving up to many secrets there sunshine!

 

[Rwolfejr]

Hi Brian,
Haven't seen you around in a while. Then again I haven't been around much lately either. My trip to Dallas is to snag up a new dog then swing by Indiana to grab my motor parts. If you have any treasures along my route let me know and maybe I can scoop them up for you.

30.5s... I'm interested in the rims but thinking I'll pass on the cords.

algar / George... I'll give you a call as soon as I finish typing this stuff.

Shawn W... Great price. Can you send me any pictures? any holes or heavy cracking?

Cody... what does cut and a half mean? Is that like double cut? I'd rather not go with aluminum rims. Would you take 'em off and if so can you send me pictures of the rubber? If you'll seperate how much for just the rubber?

I've been looking for a good while for these. Wish I would've known about this site way back. I got more potentials in a day than I have in a few months!!

 

[Brian/Pa]

been laying low staying outta trouble.
what kinda pooch ya getting?

 

[Anonymous-0]

Have a set of BFGoodrich with about 35% tread, also have a set of heavy wheels 9bolt centers which are really heavy. Wheels are 27 inches. 150 for the tires 400 for the rims or 500 for the package. I might be able to work a line on a set of Firestones that are 75% tread on wheels. They are bolted on a E-5 coop that has been made into a mod. Whole tractor is for sale maybe I can get the tires and wheels.

 

[Rwolfejr]

Decided that no other Bloodhound could measure up to Buddy so decided to go with a different breed. Stumbled on dogs called Greater Swiss Mountain Dogs and liked what I saw. Get to pick one out End of March... or maybe better put, have one pick me.
Timing of the dogs being ready to go works out really well for scooping up my engine parts too. I've got to get busy on this thing. Spring's almost here!!