3010 PTO!!!!!!!

[JD kid 1245]

I have a John Deere 3010, and i just got it to run. I tried to turn the pto on and i got it to turn on but when i tried to turn it off, the lever went back but the pto shaft kept on going. i tried to pull it back further but nothing. So any advice would be great

 

[Anonymous-0]

take the cover off under the flywheel and spray brg assy and the sleeve that it slides on with WD40

 

[JD kid 1245]

So do i have to take the whole transmission pan off the belly of the tractor of the tranny.

 

[tim s]

There's a cover under the clutch houseing , two 3/8 bolts, remove that and look up in there , you may see the problem , some things can be fixed by going up through the opening, you probably have a broken pto latch bolt.

 

[JD kid 1245]

is just that little plate on the side thats about the 4x2 roughley

 

[tim s]

No that's the timeing window,(your not very good at this are you?) it's "under" the clutch houseing. it's big enough to stuff a loaf of bread in...