3010 vs 2510

2510 was made 66-67-68, so is newer than the 3010. The 2510 is a good tractor except the original 4 cyl. hyd. pump could be a problem. My 69 2520 even had that pump. I put a 3020-4020 pump in it. My 2520 diesel has enough more power than the old 2510 gas that the bigger hyd. pump doesn't bother it.
 
3010 has problem prone PTO, power is close to the same the 2510 hasn't had as many birthdays, I would choose the 2510..
 
I just went through the engines on two for the same guy, he is going to send them to a paint shop, I re-sealed the pumps ,steer valves ,load shafts all the little oil leaks,took some time, they were both diesels, he wanted all that stuff taken care of 'before' the paint job,,good thinking,,he's going to show them, he's got a 4520 to send down next, fixing up several to show
 


DSCN0950.jpg


DSCN0940.jpg


Well I guess it might depend what you are going to do with it. If you were going to start farming and needed a tractor to do some tillage I would say the 3010 might be your best bet.
I have both and I really like the engine in the 2510. Both drive nice and work well for what I do. The 2510 is lighter and has most of the improvments that the 3020 got when it replaced the 3010.
The 3010 has some more beef built in and will outpull the 2510 while still being able to do all the little things the 2510 will do.
If I could have only one it would be the 2510.
bill
 
I had both of them. The 2510 wins hands up in my book. It would run circles around the 3010. More snap and more guts and a newer tractor. Still have the 2510. The 3010 is gone.
 
Billononthge farm you certainly have some beautiful New Generation tractors. I really enjoy your pictures of them.

Jerry
 
I have had both. The 2510D is handy as a loader tractor or doing field work and as someone pointed out more valuable because they didn't make alot of them. Of course that means you can get into a 3010 much cheaper and it is a good tractor just not as new or developed as the 2510... in my opinion.

JimDeere
 
I have a great running 2510 gas for sale, nf, syncro, rollomatic, single remote, both side shields, 7 ft back blade. original paint but straight $4500 northwestern wisconsin. email me [email protected] for more details.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top