Go to page 5 and check out the discusion on 3010 vs 2510,,you will see why a 3010 is not a good choice ....
 
I ve had a 3010 gas for about twenty years. I only run alittle over a hundred acres ,but the 10 did all my heavy work for many years and still cuts,rakes and bales all the hay plus blows snow, pulls a 6 row planter,ect.ect. I would buy one in a minute. a very reliable tractor for the money. Bob
 
i read all the coments on page five before i posted.were all 3010 ptos weak.also was the trannys in the 3010 ok. thank-you
 
I claim no expertise about the workings of the PTO and transmission, but.........we had one from '63 through '68; bought it to use with the mounted 122 cotton picker, put lots of hours on it w/4 bottom 3-point hitch breaking plow, 4-row planter, packing silage, etc. Main thing I remember that it was CRITICAL to keep the bolts holding the pto shaft tight.
 
If you keep the PTO stub bolts tight, like with a lock plate or lock wire (drilled bolt heads), and shift the PTO correctly it will work, but its easily messed up if you fail either of those. The rest is closed to the early 3020 that I think the same shop manual covers both but not the late 3020. At least that's the way it is with the 4020 and 4010.

Gerald J.
 
Hi reep, I have had a 3010 20+ years. It does baling, planting, corn picking,and loader work. If you can keep the lug nuts and ball hitch tight on your truck, the pto is not a problem. Check the amount of clutch adjustment, see if you can shift forward and reverse while moving opposite, and hydra. pump noise. Three to five gallons per hour of gas, but very nimble handling. Best of luck, Dan
 
Hi reep, I have had a 3010 20+ years. It does baling, planting, corn picking,and loader work. If you can keep the lug nuts and ball hitch tight on your truck, the pto is not a problem. Check the amount of clutch adjustment, see if you can shift forward and reverse while moving opposite, and hydra. pump noise. Three to five gallons per hour of gas, but very nimble handling. Best of luck, Dan
 
Some people get by using 2010's and 3010's without any trouble...I do not want one,,,,but that's a personal observation,, around here they are worth next to nothing..
 
2010 and 3010 share only the Deere paint and name. The 3010 is nearly trouble free where the 2010 never was trouble free.

Gerald J.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top