So I finally get the 3020 running and brush hogged for 4 hours plus 40 minute travel time. I get home and there is a hydraulic leak under the back end. I will have to investigate which will entail pulling off the draw bar which looks to be quite a chore.
There is what looks to be about a 1.5 to 2" pin or shaft (but it doesn't pivot) that is horizontal above the draw bar. It is leaking where the pin or shaft goes through a bracket. At present all I can do is watch the every 5 second dripping and collect the gold in a bucket for reuse.
Anybody have a name for this area so that I can see the parts explosion on the JD website?
There is what looks to be about a 1.5 to 2" pin or shaft (but it doesn't pivot) that is horizontal above the draw bar. It is leaking where the pin or shaft goes through a bracket. At present all I can do is watch the every 5 second dripping and collect the gold in a bucket for reuse.
Anybody have a name for this area so that I can see the parts explosion on the JD website?