mjsnodgrass
Member
i used a new to me 315 NH baler this year. it seems to bale better with 170# twine vs 130# twine. however I have a issue with the baler. it leaves a piece of twine about 1-1/2 " long on the right side of the bale near the knot. the baler bales and ties nice. made 800 bales, and didn't miss a knot. the twine knives were dull when I got the baler, so I drove out the rivets and bolted in new knives. I ran a NH 276 for years, and every once in a while there would be a piece of twine near the knot, but nothing like this. does anyone have any suggestions on what to look for? thanks for the help.