40 STANDARD

[TRACTORNUTJD]

Hi looking at a40 standard that is missing the drawbar and drawbar support. How hard are these to find?

 

[buickanddeere]

Will have to check the parts book but that drawbar assembly is a common as dirt. Same part number was probably used from the 40 to the 420 serial #125,000.
As a long shot,maybe even used from the M to the last 430 and into the 1010's

 

[Anonymous-0]

This drawbar assembly was used only on the standard model re; 40S 320S 420S 330S and 430S.They produced about 20,000 S series tractors, this may sound like alot , but the draw bar is not to easy to come by. I saw one sell at Polk's austion in August and I believe to brought about $150.00.

 

[OhioTractorGuy]

The Drawbar Framework is specific to the Standard (one piece) and the drawbar itself could be used on many different Dubuque tractors. Take a look at the Utility Tractor (40 or 420??) on the tractor's left side; it may have a drawbar on it.
A creative person could weld up a drawbar frame with a little planning, mostly made out of flat bar stock.

 

[Frank 41]

Check with John Craig at 574-551-6401.

 

[John Hankel]

I can post some pictures and get some measurements if you want to try and build one. I am pretty sure it is made from 2" x 1/2" flat stock...

These guys are right, pretty hard to come by....Lucky mine had it all there....