420 slips third

Anonymous-0

Well-known Member
420S five speed, slips out of third. Can hold in third with one finger.Sloppy shifter.Can shifter be removed W/O pulling HYD unit?I'm thinking it may be detent balls in shifter.anyone been there? thanks Bill
 

The shifter can be removed without removing the hydraulics if I remember correctly. (it has been 10 years or better since I have had mine apart though so I could be mistaken, I have worked on many transmissions since then)
 
take off the top bolts and raise straight yp and away. I don't think there is any factory plumbing in the way, been a long time here also.
 
If you have a tricycle or row crop utility/W tractor I think you can do it w/o moving hydraulics. I know on my 430 standard I had to back my hydraulic unit off to get the cover to come up. . . but it was a dual lift. The single lift hyd. unit may not stick out as far over the shifter cover.
Probably right to think its some looseness in the shifter assembly; that or some really worn gears (but probably wouldnt stay in gear with just a finger).
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top