Not sure if the 430 specs are the same as a 40 BUT, here are the 40 specs:

Cyl head - 90 ft/lbs
Mains - 145 ft/lbs
Rods - 58 ft/lbs

If no one else responds a JD dealer should be able to help you out.........or if all else fails find a torque chart which covers the proper torque on most threaded fasteners(coarse thread/fine thread, grade 5/grade 8, etc.)...........
 
Beginning at the center and working towards each end of the head, draw the bolts down to 170-180 ft-lbs torgue about a 1/2 turn each time. Hand tighten the ones on the camshaft side first to take up the tension in the cam follower springs.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top