In a bit of a pickle, a new to me 445 developed a knock last winter,. I moved it from the pole shed into my shop and began to take it apart. I could not find any marking on the rods bearing I took out so for a place to start I called and Welters had the side plate gasket and standard bearings. Yesterday I did a clearance check with blue plastiguage. My oil clearance is around .006. I called Welters and they said there is no .005 rod bearing available.
The AGCO part number is 10B421. I checked all 4 and they all measure the same.
Does any one have any of these? Or ideas on what I should do next? Thanks Dan
The AGCO part number is 10B421. I checked all 4 and they all measure the same.
Does any one have any of these? Or ideas on what I should do next? Thanks Dan