450 International

I switched from 12V positive ground to alternator 12V negative ground and now my tractor won"t start and I don't have any spark. Any ideas?
 
You let the smoke out of the electronic ignition by switching from positive to negative ground. You will need a new ignition unit made for negative ground.
 
If your tractor was equipped with voltage regulator and you done way with that i'll bet you that it had a post on regulator MARK L.

That would be the load terminal for ignition switch etc.

If that wire is not connected to a live terminal some where you will not have anything .

off top of my head don't remember the color of that wire.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top