Robert L Koller
New User
In need of the exhaust pipe from the manifold. 1948 Ford F3 flathead 6 cyl. Also looking for the hinge bolts. Ovalhead countersunk 5/16 inch 28 thread.
K
Kruse
Guest
Do a Google search for Dennis Carpenter. They have an online catalog and probably a paper one also. They can probably get you fixed up.
LMC truck might have something also, but it might come from half way around the world.
LMC truck might have something also, but it might come from half way around the world.
Any good exhaust shop should be able to make the complete exhaust system for you for about as much as it"s going to cost to buy one and have it shipped.
As for the door bolts, I bought my from John"s F-FUN HUNDREDS, part #56-428608-A
http://www.johnsf100.com/
I had trouble finding them a few years ago and they were the only place that I could find that had them.
My truck page
As for the door bolts, I bought my from John"s F-FUN HUNDREDS, part #56-428608-A
http://www.johnsf100.com/
I had trouble finding them a few years ago and they were the only place that I could find that had them.
My truck page
Anonymous-0
Well-known Member
Here is a little sweetheart we use quite a bit. With its 100 inch wheelbase, it can get into spots others can't. And, it does draw attention wherever we go.
Stan - Florida
Well-known Member
Just curious...appoximately how deep is the bed on your F-3? Also, how far is it from the top of the front endgate to the bottom of the rear window of the cab.
I keep remembering that we had 1" X 12" sideboards on our '52 F-3 and that they came up to the bottom of the window. Could that be right, or is my old memory fading on the important things in life?
Stan
I keep remembering that we had 1" X 12" sideboards on our '52 F-3 and that they came up to the bottom of the window. Could that be right, or is my old memory fading on the important things in life?
Stan
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy