56 case 400 diesel puller

56Case400

New User
I"m setting out to build another old case puller. I currently have a 57 super 400 diesel with an newer model 301ci case combine engine in it. I pull the tractor in farmstock 8500-9250 pound classes and still use it around the farm for plowing, discing, and cutting hay. Now I just recently bought a 56 case 400 diesel, it has the 251 cubic inch engine in it. What I want to do is build a stout 6000-7500 pound farmstock puller out of it, but still have it reliable enough to do a little farm work with it. I have a good 267 cube block that I could build. Does anybody have any recommondations for strong power plants? I"ve toyed with the idea of another 301 engine, or even a 336 if i could find one. But I"d really like to keep this thing looking stock and make a hell of a sleeper out of it.
 
Just bore it to take the 4 5/8 sleeves from an early series 870. Use Moline M670 LP pistons and pins, heads, intake, and cam from an early 830 diesel, head gaskets from early series 870. It's a sleeper that most folks won't ever recognize, unless they know their Case tractors.
 
Well I'm not building a "pure" farmstock puller. And I consider a farmstock tractor anything that you can still take to the field and use. There is no difference in putting a 301 engine in a 400 case then say someone putting a 301 engine in a 460 international, or a 350 engine in farmall H.
 
Lamont do you know where any early 830 diesel engines are? Do you know what kinda of power that combo would make, and how much fuel could be turned to it?
 
I've never done it but plan to someday. I have some of the parts now that I've been gathering here and there. The compression would increase somewhere around 12 percent, so it would be pretty high, but the early style heads have the compression release to ease the load on the starter. HP estimate would simply be a guess, but I would think 90 to 100 would be possible.
 
...or a powerblock in a JD. No it's not going to be stock. That's why he called it a sleeper, sort of like a 900+ cube JD G that "looks" stock, but will pull 2nd and 3rd gear in the 8500 lb. "Farmstock" class.
 
30 series heads don't fit hundred series blocks with out redrilling the block and you want to use g1000 pistons 4 5/8 bore to make a 336 and they need to be cut down to keep the compression down , easier to use a 30 series block but if using the 400 block get late 800 heads, bigger ports and energy cells than a 900 ect., maybe 630 wants to volunteer to be the new pulling tech. to enforce rules, who cares what's in an engine, set a speed limit and be done with it.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top