65 MF hyd. adjust

cole in mo.

Well-known Member
Hi to all, neighbor just bought a 65 mf D, as soon as he starts it the lift arms go up and stay there. I pulled the lift cover, drained the oil, found nothing in the bottom. Only thing I did find was just inside the dipstick hole is the valve actuating piece, that has a roller on both ends, was out of the guide at the bottom. It hinges on a threaded rod, the nut at the end was scrwed back flush with the rod. Can anybody famimilier with the 65 tell me how far back that nut should be?
 
Before you start messing with the lift adjustment, look at the control levers and you will see two, on labeled operational control up/down and the other labeled draft. Both of those control the lift arms. If you want to be sure it's not just something sticking, be sure both are pushed forward, and move them up and down fairly rapidly a few times to free up any stuff that may be caught up in the valve.

The valve arm itself is not based on how far the adjustment nut is threaded on the control rod, but on adjusting it so it begins to lift 500 lbs loaded on the the lift arms at 500 rpm idle, with the lift arms positioned all the way forward with the permanent stops removed. Raise the position control lever until the lift arms begin to drop, and reinstall the stop.
If the top cover hasn't been removed recently, chances are you'll not have to mess with the adjustment.
 
Sorry, didn't register that you already removed the lift cover. Be sure that when you replace it, you get the control rods on the correct side of the arm with the little rollers on it. Be sure all the levers, arms and such on the top cover move freely. Chances are that's where the problem is, not with the pump or control valve if it's sticking in the raised position.

When you reinstall the cover, you'll have to block the valve control arm back so the control arms come down on the front side of the upper roller.
 
Thanks for the info guy, got the cover back on, but gotta wait for a starer bendix before I can check anything.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top