730 standard non adjustable axle

[taylorennis]

what size and model pull plow would have been used with 730 standard with 18 inch tires

 

[Anonymous-0]

They advertised the tractor to be a 4-5 plow tractor.
Here in southern Indiana it did good to pull a 3 bottom plow if one vanted to plough very deep.

 

[long green line man]

The 666H trip back standards ; 3 x 16" good match....

 

[Tx Jim]

Soil type & plowing depth will determine number/width of bottoms.

 

[old popper]

That is what I pull with my 720 Diesel rowcrop.

 

[Kent Petersen]

Here in eastern SD they pulled 514s pretty nicely

 

[taylorennis]

I am looking at a 4-16

 

[taylorennis]

looking at 4-16

 

[wilamayb]

Depending on where you live/soil type a 4-16 can be a bit much for a 720.

I use a 3-16 mounted plow behind my 720 standard. It's a mouthful if the soil is heavy. I also have a 4-14 66 drawn plow that is a FULL load for the 720. 2nd gear on my high speed trans is all it can muster and traction can be an issue if plowing deep even though it is fitted with 3 sets of wheel weights. I live in an area of heavy clay and silt clay loam. They are sticky. I prefer too small of a plow. It is easier to manage.

My 720 diesel is healthy. It makes a bit over 60 HP on the powershaft so it is making more than the rated 59 on the belt pulley for sure. Despite being healthy a 4-14 plow is still a challenge.