820Dpony Power Steering Headaches

CHSchmidt

New User
Just finished overhauling both motors on a 1957 820. Both motors run beatiful. Makes a guy feel good when that big motor lites up and comes to life. Then it happened, I grabbed the steering wheel (tires were pointing straight) and suddenly and very hard and fast the tires spun to the right. So hard it could of easily broke my wrist if I had be holding it wrong. I can sometimes slowly turn it left, but It never goes left past center, and then suddenly will turn fast back to the right. Yes, I used the $7.45per quart J.D. power steering fluid. Before the engine overhaul, the steering was fine. Any ideas? I had it running 4 or 5 times today, thought maybe air in the system, didn't get any better. Then I jacked the front end off the ground and was able to slowly steer it all the way to the left, but then it spun itself all the way back to the right. Any help would be greatly appreciated. Thanks
 
Have you tried the procedure where you slightly loosen the 4 bolts holding the steering valve to the worm gear housing and tap it back and forth to find the "sweet spot" where the centering of the cam mechanism on the worm and the "dead center" area of the steering valve coincide?

More info in the shop manual.
 
I rebuilt the power steering on my 830 15 years ago and Bob is right that you lossen the 4 bolts but you just need to tap it lightly and it may only need to move slightly. Once you have the wheels sitting straight ahead and steering wheel should not move left or right after you have it set. Had an JD 60 do that to me and your right they will go hard. I think that moving that block is centering the flow of oil. Good Luck!
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top