830 basketCASE

So I pulled a trailer have way accross the country to get this old boy. The previous owner said wverything worked and it was in really good shape. Five minutes after I was there I almost turned around and cut my losses but I didn't.
I decided to take her home and see what I had. It ran well when I loaded it but after getting back home it wouldn't start (starter burned out). So, I'm trying to keep my head up and make a good one out of her! I put it in the shop, tore into it and decided to paint it up, build a wiring harness, (the old wire had been added to, repaired, rerouted so many times, I couldn't follow anything.
This thing has been service by a pack of clowns. Stuff underneath held together with baling wire and cardboard. A piece of pvc pipe had been shoved down the steering column to act as the bushings!
Anyway, while get my starter rebuilt and wait for a few parts to arrive I'm moving forward.
Here"s hoping I don't find too many more surprises...slim

<a href="http://photobucket.com" target="_blank">
020.jpg" border="0" alt="Photobucket
</a>

<a href="http://photobucket.com" target="_blank">
017-2.jpg" border="0" alt="Photobucket
</a>
 
After you spend twice as much as you thought and swear alot,get frusterated wishing you never started this damned project it will all fall together and you will love the old thing!!
 
Your story sounds remarkably familiar.

The good news is, you'll be very happy with the final result, and eventually forget how much you have invested. In fact, don't be surprised if you have a desire to do it again a few months after you get this one done......
 
I don't see where it is a basket CASE, you drove it on your trailer, and it is 45+/- yrs. young. I noticed the grill panals in the one pic are there and straight, which is a real plus. It has good tires, and the front tierod doesn't appear to have an angle iron welded on it. If the only issues that you encountered was springs etc., starter and wireing harness, you got a winner. The pvc pipe will probably last as long as the original bushing did LOL. You have done a really nice job on it. Keep us posted.
Loren
PS, If all you had to do was wax it when you got home, you would't have gotton to chat with all us fine upstanding CASE guys. HeHe Glad to have you on the forum.
 
I was planning on using the spray cans on the red and squirting the tan with the sprayer.

Oh oh, about the brakes. I noticed n the test drive, that the left held much better than the right. How hard is it for me to look at them while it"s in the shop...slim
 
It will be real easy in your shop, especially with the fenders off. Just pull the brake covers off and clean up the metal expansion disc assys., (lightly lube balls, check springs, chase threads on acuator clevis bolt). and take a sander with fine paper and deglaze the acuators and fiber discs. If you have oil seeping in to them, I would sugest you replace the diff seal, while apart.
Loren
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top