886 T/A shift problems

IHMANKY

Member
Well, rolled the hay I was discussing in the implement board the other day, everything went like clockwork! Only problem I had, this morning on the way from the barn down to the field, I was making a long pull up the road with the 886, not real steep but a long grade, and needed to drop the T/A to low. Well i tugged and tugged and tugged and finally it gave. Topped the hill and tossed her back up in high, not a problem. Next hill I ended up bringing her to a stop and having to start back out in second due to lost momentum. I tugged and tugged trying to go to 4 low and the shifter arm buckled ( real thin steel anyhow.) It's straightened back out now, but of course weakened. Not a problem to fix though. Point is, what is causing this? Is there a pawl or something that's hanging? This came on all of a sudden.
 
Well it could be that the likage in the dash support is rusted up or that it is time for a new T/A shift cable as i have found both to be the problem So remove the plastic around the dash and use a good penetrating fluid and see it also helps to remove ths shift cable at the lever and this will also tell you real fast if it a linkage problem or a cable problem .
 
The roller on your TA lever is worn.Replace it with a new one.It should switch to a new style link with a roller brg on it.
 
Thanks guys, as always, the best folks can be found on this forum I believe. I will let you know what I find, probably be next weekend as I have to work nights starting tomorrow thru. wed. night.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top