Anonymous-0

Well-known Member
Hello the starter on my Ford 8n spins but will not engage the flywheel i removed it and can't seem to see what the problem is how does the starter gear engage? thanks in advance
 
I would try moving the flywheel a little bit because if it is just in the right spot it may not be able to engage it (as it would hit the actual tooth).

Did it turn it before? Have you tried it outside the tractor to see if it works correctly?
 
Bendix not kicking the gear out, broke, will need replaced. A lot in the archives on the new and old style bendix and a common problem.
 
It could be a low battery not spinning the starter fast enough to engage the starter gear into the fly wheel. Have the battery checked before replacing anything then get the starter tested.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top