Anonymous-0

Well-known Member
I have a 930 comfort king tractor that has a vibarating noise like a rattling shaft noise. It is louder at diffrent rpms. it sounds like it comes from the front of the motor but gets quieter if the clutch is disengauged. if any one has any ideas let me know I dont know what to start tearing apart.
 
t.o. brg. only spins when clutch is depressed so if it makes noise the rest of the time that's not it. This wouldn't be that 930 sold on the Interstate junk sale by Sioux Fals a few weeks ago would it?
 
are you sure its at the front of the motor??? sounds odd that it would have noise at the front and the clutch disengagement would improve it. If its at the front i would suspect bearings in the PS or water pump or if its a gas the govenor. Could be rod bearings too.. If its at the rear of the motor it could be an input shaft bearing and when you disengage the clutch its relieved a bit. There may also be a bearing in the flywheel for the clutch that may be bad. Maybe that is making noise and vibrating thru the crank so it sounds like its at the front. Need to poke around and pin point the location.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top