a/c vacuum pump

You get what you pay for.

They work to a point, but probably don't draw a deep enough vacuum to dehydrate the system.

Between them and the air compressor, they make a LOT of noise, as well.
 
I question how efficient air tools. Case in point. When my neighbor sharpens the knifes on his combine they take them out and clamp them down to a work bench and with his son's help one takes the 4.5 inch disk grinder and the other uses a pneumatic die grinder. The air compressor takes a lot more power to run than the disc grinder and it can't keep up with the disc grinder. The guy with the pneumatic die grinder gets a break every so often waiting for the compressor to catch up, and it probably uses 4 to 5 times more power than the 4.5 inch side grinder.
 
they work just fine. you just need to plumb in a vacuum gauge. been using one for years and they will take it down as low as you need. just regulate your air so as to not get too low.
 
(quoted from post at 16:14:57 06/23/09) they work just fine. you just need to plumb in a vacuum gauge. been using one for years and they will take it down as low as you need. just regulate your air so as to not get too low.

I'd like to see some documentation on this statement, and I question it's accuracy. There's a REASON why us guys who do/ did HVAC service felt the need to spend (then 250) nowadays $$$$$ on a vacuum pump, when, hell, just coulh'ha plugged 'er inta the sink n' wasted some water'n somthin

I call


QBS

http://www.zerobeat.net/drakelist/missingq.html
 
Been using a salvaged (110V) air conditioner compressor ever since I've had equipment with air. Cost.........free; of course, you've got to have electricity and it will not quite reach 30 inchs Hg...........like them air driven pumps may do. :>)) If I were in business, I'd need something better, but for my own use............
 
You better have a big air compressor to use the air powered vacuum pumps. I have one it is better than not having a vacuum pump, but just barely.
 
A good vacuum pump will get down to 50 microns absolute air pressure. Atmospheric pressure is 29.92 inches of mercury, or 759,968 microns. I'll let you decide if a venturi will pull down to 50 microns.

I just picked up a good used Robinair 15600 vacuum pump off Craigslist for 100 bucks. I had to change the oil and swap the old fitting for the acme-style fitting, and now it's as good as new. I suspect if you look around you can find a real vacuum pump for about what you'd pay for a venturi.
 
Just did my air over on my Vette. Got a new Robinaire pump on Ebay for $135 Buy it now deal.
Would not waste my money on the air operated one.
The real ones are on Ebay all the time for less than $150
 
They work just fine. They will pull just as deep of a vacuum as an electric, but use a lot of air, so more costly to use. I've sold plenty of both, mechanics usually buy electric since they can use them at home if they don't have a compressor, and the air powered make a lot of noise.
 
I also have a salvaged refrigerator compressor that has been used for years to pump down badly contaminated systems and it pulls a good vac.I have never before heard it suggested that it's possiable to over evacuate.To the contrary I sometimes leave the pump going for hours.
 
started out with one , had 60 gallon 125psi compressor,it worked fine. once ran a 500 foot air hose to a neighbor and vacumed his 5 ton house ac with it,i had to stop and let the compressor catch up a few times..
 
I had one and it did work fine. My 2hp compressor ran it no problem. I do have a Robinair electric vacuum pump now. As far as the vacuum level, I couldn't tell on my manifold set any difference. Both would pull to nearly 30".
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top