I'm working on mounting and ABG 200 cultivator to my A. I'm still working out how to raise/lower as I have a 3-point so the stock way won't work. Going to weld something up that bolts to my 801 arms this week and hope for the best. Might use chains from the top link to the lift arms to limit drop as I don't have the depth adjusting arms. No rear sweeps for this cultivator.
Anyway, in the photo below, is the front top part supposed to attach to anything or can it simply float like this? This will be a working cultivator and not shown.
PS. I drove 10 hours one way to pick this up and on the way back talked with a guy that had just cut up a 4-row front mount for his scrap pile. He gave me lift pipes and the front bill and laughed about me going all that way to pick up junk. His scrap pile was disturbing.
Anyway, in the photo below, is the front top part supposed to attach to anything or can it simply float like this? This will be a working cultivator and not shown.
PS. I drove 10 hours one way to pick this up and on the way back talked with a guy that had just cut up a 4-row front mount for his scrap pile. He gave me lift pipes and the front bill and laughed about me going all that way to pick up junk. His scrap pile was disturbing.