AC 149 eng Running temp

Shawnba67

Member
Is it normal for a AC 149 gas engine to run above the thermostat temp? I just did an in frame on an ole D15 that did not have a thermo in it previously(former owner no idea why) It warms up to 170 and stays there until I put a load on it then goes up to just shy of 200. I did try richening up my main jet but if it made any difference it was less than 5 degrees. I am getting good air flow through the radiator, I do not know the condition of Water Pump or the inside of rad beyond not leaking.
I do know before the resleeve without the thermo the temp never moved until I got to heavy load then it would get up to about 170 and hang out there.
 
D-15 gassers have a very narrow fan belt. It must be kept tight or it will slip causing you trouble. I've even gone as far as replacing them with a wider belt (technically too wide for the pulleys) and had great success with tension and belt life. Sounds to me like you need a new and accurate temp gauge. Just because the gauge is working doesn't mean it may not be off in its reading.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top